TrxShell [ mangaberri.com ]

Name	Size	Permission
conf-hooks.d	[ DIR ]	drwxr-xr-x
conf.d	[ DIR ]	drwxr-xr-x
dhcpcd-hooks	[ DIR ]	drwxr-xr-x
hooks	[ DIR ]	drwxr-xr-x
modules.d	[ DIR ]	drwxr-xr-x
scripts	[ DIR ]	drwxr-xr-x
hook-functions	28.22 KB	-rw-r--r--
init	7.5 KB	-rwxr-xr-x
modules	357 B	-rw-r--r--

Code Editor : hook-functions

# -*- shell-script -*-

catenate_cpiogz() {
	# Sanity check
	if [ ! -e "${1}" ]; then
		echo "W: catenate_cpiogz: arg1='${1}' does not exist." >&2
		return
	fi

cat "${1}" >>"${__TMPCPIOGZ}"
}

prepend_earlyinitramfs() {
	# Sanity check
	if [ ! -e "${1}" ]; then
		echo "W: prepend_earlyinitramfs: arg1='${1}' does not exist." >&2
		return
	fi

cat "${1}" >>"${__TMPEARLYCPIO}"
}

# force_load module [args...]
force_load()
{
	manual_add_modules "$1"
	echo "${@}" >>"${DESTDIR}/conf/modules"
}

# Takes a file containing a list of modules to be added as an
# argument, figures out dependancies, and adds them.
#
# Input file syntax:
#
#   # comment
#   modprobe_module_name [args ...]
#   [...]
#
add_modules_from_file()
{
	# Sanity check
	if [ ! -e "${1}" ]; then
		echo "W: add_modules_from_file: arg1='${1}' does not exist." >&2
		return
	fi

grep '^[^#]' "${1}" | while read -r module args; do
		[ -n "$module" ] || continue
		force_load "${module}" "${args}"
	done
}

# Locate a firmware file with the given name and copy it into DESTDIR, unless
# DESTDIR already contains such a file.
# Returns an error if no such firmware file can be located and DESTDIR doesn't
# already contain any matching file. (It is up to the caller to figure out
# whether a warning should be printed in that case.)
add_firmware()
{
	local ext firmware found_fwloc fwloc path

firmware="${1}"

for path in "updates/${version?}" "updates" "${version}" ""; do
		for ext in ".xz" ".zst" ""; do
			fwloc="/lib/firmware${path:+/}${path}/${firmware}${ext}"
			if [ -e "${DESTDIR}${fwloc}" ]; then
				# DESTDIR already contains a matching firmware file.
				return 0
			fi
			if [ -z "${found_fwloc}" ] && [ -e "${fwloc}" ]; then
				found_fwloc="$fwloc"
			fi
		done
	done

if [ -z "${found_fwloc}" ]; then
		# We can't figure out where to get that firmware from.
		return 1
	fi

copy_file firmware "${found_fwloc}"
}

# Add dependent modules + eventual firmware
# If STAGE_KERNEL_MODULE_COPYING=1 is set, only collect the wanted kernel
# modules. Call apply_add_modules to copy the kernel modules in this case.
manual_add_modules()
{
	if [ "${STAGE_KERNEL_MODULE_COPYING-}" = 1 ]; then
		for module in "$@"; do
			echo "$module" >> "$__MODULES_TO_ADD"
		done
		return
	fi
	_call_dracut_install "$@"
}

# Copy the kernel modules that were staged in manual_add_modules
apply_add_modules()
{
	# shellcheck disable=SC2046
	_call_dracut_install $(sort -u "$__MODULES_TO_ADD")
	true > "$__MODULES_TO_ADD"
}

_call_dracut_install()
{
	local dracut_verbose

if [ $# -eq 0 ]; then
		return
	fi

if [ "${verbose?}" = "y" ]; then
		dracut_verbose=-v
	fi

/usr/lib/dracut/dracut-install -D "$DESTDIR" --kerneldir "/lib/modules/${version?}" \
		--firmwaredirs "/lib/firmware/updates/${version?}:/lib/firmware/updates:/lib/firmware/${version?}:/lib/firmware" \
		${dracut_verbose-} -o -m "$@"
}

# manual_add_modules() takes care of adding firmware for things that were built
# as modules; but drivers can also be built into the kernel itself. To cover
# that case, we have to look at modules.builtin.modinfo instead.
# This file is generated by the kernel's build process since commit 898490c010b5
# ("moduleparam: Save information about built-in modules in separate file"),
# which was added in Linux 5.2.
add_builtin_firmware()
{
	local builtin_modinfo_path builtin_modname firmware

builtin_modinfo_path="/lib/modules/${version?}/modules.builtin.modinfo"
	if [ ! -e "$builtin_modinfo_path" ]; then
		if linux-version compare "${version}" ge 5.2; then
			echo "W: Can't find modules.builtin.modinfo (for locating built-in drivers' firmware, supported in Linux >=5.2)" >&2
		fi
		return
	fi

tr '\0' '\n' < "$builtin_modinfo_path" | grep -E '^[^=]*\.firmware=' | sed -n 's/\.firmware=/\t/p' | while read -r builtin_modname firmware; do
		if ! add_firmware "$firmware"; then
			echo "W: Possible missing firmware /lib/firmware/${firmware} for built-in driver ${builtin_modname}" >&2
		fi
	done
}

# $1 = file type (for logging)
# $2 = file to copy to initramfs
# $3 (optional) Name for the file on the initramfs
# Location of the image dir is assumed to be $DESTDIR
# If the target exists, we leave it and return 1.
# On any other error, we return >1.
copy_file() {
	local type src target link_target

type="${1}"
	src="${2}"
	target="${3:-$2}"

[ -f "${src}" ] || return 2

if [ -d "${DESTDIR}/${target}" ]; then
		target="${target}/${src##*/}"
	fi

# Canonicalise usr-merged target directories
	case "${target}" in
	/bin/* | /lib* | /sbin/*) target="/usr${target}" ;;
	esac

# check if already copied
	[ -e "${DESTDIR}/${target}" ] && return 1

mkdir -p "${DESTDIR}/${target%/*}"

if [ -h "${src}" ]; then
		# We don't need to replicate a chain of links completely;
		# just link directly to the ultimate target
		link_target="$(readlink -f "${src}")" || return $(($? + 1))

# Update source for the copy
		src="${link_target}"

# Canonicalise usr-merged target directories
		case "${link_target}" in
		/bin/* | /lib* | /sbin/*) link_target="/usr${link_target}" ;;
		esac

if [ "${link_target}" != "${target}" ]; then
			[ "${verbose?}" = "y" ] && echo "Adding ${type}-link ${target}"

# Create a relative link so it always points
			# to the right place
			ln -rs "${DESTDIR}/${link_target}" "${DESTDIR}/${target}"
		fi

# Copy the link target if it doesn't already exist
		target="${link_target}"
		[ -e "${DESTDIR}/${target}" ] && return 0
		mkdir -p "${DESTDIR}/${target%/*}"
	fi

[ "${verbose}" = "y" ] && echo "Adding ${type} ${src}"

cp -pP "${src}" "${DESTDIR}/${target}" || return $(($? + 1))
}

# $1 = executable/shared library to copy to initramfs, with dependencies
# $2 (optional) Name for the file on the initramfs
# Location of the image dir is assumed to be $DESTDIR
# We never overwrite the target if it exists.
copy_exec() {
	local src target x nonoptlib ret

src="${1}"
	target="${2:-$1}"

copy_file binary "${src}" "${target}" || return $(($? - 1))

# Copy the dependant libraries
	for x in $(env --unset=LD_PRELOAD ldd "${src}" 2>/dev/null | grep -P '^\t' | sed -e '
		/\//!d;
		/linux-gate/d;
		/=>/ {s/.*=>[[:blank:]]*$[^[:blank:]]*$.*/\1/};
		s/[[:blank:]]*$[^[:blank:]]*$ (.*)/\1/' 2>/dev/null); do

# Try to use non-optimised libraries where possible.
		# We assume that all HWCAP libraries will be in tls,
		# sse2, vfp or neon.
		nonoptlib=$(echo "${x}" | sed -e 's#/lib/$[^/]*/$\?$tls\|i686\|sse2\|neon\|vfp$.*/$lib.*$#/lib/\1\3#')
		nonoptlib=$(echo "${nonoptlib}" | sed -e 's#-linux-gnu/$tls\|i686\|sse2\|neon\|vfp$.*/$lib.*$#-linux-gnu/\2#')

if [ -e "${nonoptlib}" ]; then
			x="${nonoptlib}"
		fi

# Handle common dlopen() dependency (Debian bug #950254)
		case "${x}" in
		*/libpthread.so.*)
			copy_libgcc "${x%/*}" || copy_libgcc "${x%/*}/.." || return
			;;
		esac

copy_file binary "${x}" || {
			ret=$?
			[ ${ret} = 1 ] || return $((ret - 1))
		}
	done
}

copy_libgcc() {
	local libdir library

libdir="$1"
	for library in "${libdir}"/libgcc_s.so.[1-9]; do
		copy_exec "${library}" || return
	done
}

# Copy entire subtrees to the initramfs
copy_modules_dir()
{
	local kmod first exclude
	local modules=
	local dir="$1"
	shift

if ! [ -d "${MODULESDIR}/${dir}" ]; then
		return;
	fi
	if [ "${verbose}" = "y" ]; then
		echo "Copying module directory ${dir}"
		if [ $# -ge 1 ]; then
			echo "(excluding $*)"
		fi
	fi

# Build up an expression for find
	first=true
	for exclude in "$@"; do
		# Change .ko suffix in exclusion to .ko*
		if [ "${exclude%.ko}" != "${exclude}" ]; then
			exclude="${exclude}*"
		fi
		$first && set --
		set -- "$@" -name "${exclude}" -prune -o
		first=false
	done

# shellcheck disable=SC2044
	for kmod in $(find "${MODULESDIR}/${dir}" "$@" -name '*.ko*' -printf '%f\n'); do
		modules="$modules ${kmod%%.*}"
	done
	# shellcheck disable=SC2086
	manual_add_modules $modules
}

# Similar to copy_modules_dir, but only list the modules. Only available in Ubuntu 24.04
_list_modules_in_dir()
{
	local kmod first exclude
	local modules=
	local dir="$1"
	shift

if ! [ -d "${MODULESDIR}/${dir}" ]; then
		return;
	fi

# shellcheck disable=SC2044
	for kmod in $(find "${MODULESDIR}/${dir}" "$@" -name '*.ko*' -printf '%f\n'); do
		modules="$modules ${kmod%%.*}"
	done
	echo "$modules"
}

# walk /sys for relevant modules
sys_walk_mod_add()
{
	local driver_path module device_path modalias
	device_path="$1"

while [ "${device_path}" != "/sys" ]; do
		# device modalias
		if [ -e "${device_path}/modalias" ]; then
			modalias=$(cat "${device_path}/modalias")
			if [ -n "${modalias}" ]; then
				manual_add_modules "${modalias}"
			fi
		fi

# current driver module
		driver_path="$(readlink -f "${device_path}/driver/module")"
		if [ -e "$driver_path" ]; then
			module="$(basename "$(readlink -f "$driver_path")")"
			if [ -n "${module}" ]; then
				manual_add_modules "${module}"
			fi
		fi

device_path="$(dirname "${device_path}")"
	done
}

nvme_dev_sys_walk_mod_add()
{
	local dev_sys_path component nvme_sys_path
	dev_sys_path="$(readlink -f "$1")"
	if ! echo "$dev_sys_path" | grep -q "nvme-subsys"; then
		return
	fi
	for component in "$dev_sys_path"/nvme* ; do
		if [ -L "$component" ] ; then
			nvme_sys_path=$(readlink -f "$component")
			sys_walk_mod_add "$nvme_sys_path"
		fi
	done
}

block_dev_sys_walk_mod_add()
{
	local dev_sys_path disk_sys_path component

# Resolve symlink so sys_walk_mod_add can walk up the hierarchy
	dev_sys_path="$(readlink -f "$1")"

# Find whole disk from partition
	if grep -q "^DEVTYPE=partition$" "$dev_sys_path/uevent"; then
		disk_sys_path="$dev_sys_path/.."
	else
		disk_sys_path="$dev_sys_path"
	fi

# Iterate over component of a layered device
	find "$disk_sys_path/slaves" -mindepth 1 -maxdepth 1 | while read -r component; do
		block_dev_sys_walk_mod_add "$component"
	done
	nvme_dev_sys_walk_mod_add "$disk_sys_path/device"

sys_walk_mod_add "${dev_sys_path}"
}

block_dev_mod_add()
{
	local dev_node dev_num dev_sys_path
	dev_node="$1"

# Look up device number and convert to decimal as it appears in sysfs
	dev_num="$(stat -L -c %t:%T "$dev_node")"
	dev_num="$((0x${dev_num%:*})):$((0x${dev_num#*:}))"

# Look up device in sysfs
	dev_sys_path="/sys/dev/block/$dev_num"
	if [ ! -d "$dev_sys_path" ]; then
		echo "mkinitramfs: for device ${dev_node} missing ${dev_sys_path}" >&2
		echo "mkinitramfs: workaround is MODULES=most" >&2
		echo "mkinitramfs: Error please report the bug" >&2
		exit 1
	fi

block_dev_sys_walk_mod_add "$dev_sys_path"
}

# Copy all loaded or built-in modules matching the given pattern.
# Pattern mustn't include directory or '.ko' suffix but should use
# '[-_]' to allow for differences in naming between /sys/module and
# modules.builtin.
add_loaded_modules()
{
	local pattern="$1"
	local module builtin
	builtin="/lib/modules/$(uname -r)/modules.builtin"

for module in /sys/module/$pattern; do
		if [ -d "$module" ]; then
			manual_add_modules "$(basename "$module")"
		fi
	done
	if [ -f "$builtin" ]; then
		while read -r module; do
			case "$module" in
			*/$pattern.ko)
				manual_add_modules "$(basename "$module" .ko)"
				;;
			esac
		done < "$builtin"
	fi
}

# find and only copy modules relevant to a mountpoint
dep_add_modules_mount()
{
	local dir dev_node FSTYPE

dir="$1"

# require mounted sysfs
	if [ ! -d /sys/devices/ ]; then
		echo "mkinitramfs: MODULES dep requires mounted sysfs on /sys" >&2
		exit 1
	fi

# find out block device + fstype
	# shellcheck disable=SC2034
	eval "$(while read -r dev mp fs opts rest ; do \
		[ "$mp" = "$dir" ] && [ "$fs" != "rootfs" ] \
		&& printf "dev_node=%s\\nFSTYPE=%s" "$dev" "$fs"\
		&& break; done < /proc/mounts)"

# Only the root mountpoint has to exist; do nothing if any other
	# directory is not a mountpoint.
	if [ "$dir" != / ] && [ -z "$dev_node" ]; then
		return
	fi

# handle ubifs and return since ubifs is mounted on char devices
	# but most of the commands below only work with block devices.
	if [ "${FSTYPE}" = "ubifs" ]; then
		manual_add_modules "${FSTYPE}"
		return
	fi

if [ "${FSTYPE}" = "zfs" ]; then
		manual_add_modules "${FSTYPE}"
 
		# ZFS uses the name of a filesystem instead of a device. Find
		# the devices that make up the pool containing the specified
		# filesystem, and add the appropriate driver for each device.
		local poolname="${dev_node%%/*}"
		# shellcheck disable=SC2034
		zpool list -vPL "$poolname" | while read -r dev ignored; do
			# Ignore non-leaf vdevs by skipping anything that doesn't
			# look like an absolute path
			echo "$dev" | grep -q '^/' && block_dev_mod_add "$dev"
		done
		return
	fi

if [ "$dir" = / ] && [ "${dev_node}" = "/dev/root" ] ; then
		if [ -b "${dev_node}" ]; then
			# Match it to the canonical device name by UUID
			dev_node="/dev/disk/by-uuid/"$(blkid -o value -s UUID "${dev_node}") 2>/dev/null
		else
			# Does not exist in our namespace, so look at the
			# kernel command line
			dev_node=
			# shellcheck disable=SC2013
			for arg in $(cat /proc/cmdline); do
				case "$arg" in
				root=*)
					dev_node="${arg#root=}"
					if [ "${dev_node#/dev/}" = "$dev_node" ]; then
						dev_node="/dev/$dev_node"
					fi
					;;
				--)
					break
					;;
				*)
					;;
				esac
			done
		fi
	fi

# recheck device
	if [ -z "$dev_node" ] || ! dev_node="$(readlink -f "${dev_node}")" \
		|| ! [ -b "$dev_node" ]; then
		echo "mkinitramfs: failed to determine device for $dir" >&2
		echo "mkinitramfs: workaround is MODULES=most, check:" >&2
		echo "grep -r MODULES ${CONFDIR}" >&2
		echo "" >&2
		echo "Error please report bug on initramfs-tools" >&2
		echo "Include the output of 'mount' and 'cat /proc/mounts'" >&2
		exit 1
	fi

# do not trust mount, check superblock
	FSTYPE=$(blkid -o value -s TYPE "${dev_node}")
	if [  -z "${FSTYPE}" ]; then
		echo "mkinitramfs: unknown fstype on device ${dev_node}" >&2
		echo "mkinitramfs: workaround is MODULES=most" >&2
		echo "Error please report bug on initramfs-tools" >&2
		exit 1
	fi

# Add filesystem
	manual_add_modules "${FSTYPE}"

block_dev_mod_add "$dev_node"
}

class_add_modules()
{
	local device

for device in "/sys/class/$1"/*; do
		device="$(readlink -f "$device")" \
			&& sys_walk_mod_add "$device"
	done
}

dep_add_modules()
{
	local device dev_node
	local modules=

dep_add_modules_mount /
	dep_add_modules_mount /usr

if [ -n "${RESUME}" ]; then
		dev_node="$(resolve_device "${RESUME}")"
		if [ -n "${dev_node}" ]; then
			block_dev_mod_add "${dev_node}"
		fi
	fi

# sys walk some important device classes
	for class in extcon gpio phy pwm regulator rtc; do
		class_add_modules "$class"
	done

# clk, USB-PHY and pinctrl devices are outside the device model (!) so
	# match loaded modules by name
	add_loaded_modules 'clk[-_]*'
	add_loaded_modules 'phy[-_]*'
	add_loaded_modules 'pinctrl[-_]*'

# Sys walk keyboards.  We identify keyboards as input devices
	# that can generate at least key events 1-31; udev has the
	# same heuristic.  Note that the format of the bitmap
	# properties depends on the word size of the process reading
	# the uevent file!
	for device in /sys/class/input/input*; do
		if grep -qs "^KEY=.*fffffff[ef]$" "${device}/uevent"; then
			sys_walk_mod_add "$(readlink -f "$device")"
		fi
	done

# Sys walk graphics for machines that don't have a generic framebuffer
	# device and wouldn't have a working video console otherwise.
	walk_graphics=yes
	for device in /sys/bus/platform/drivers/efi-framebuffer/* \
	              /sys/bus/platform/drivers/platform-framebuffer/* \
	              /sys/bus/platform/drivers/simple-framebuffer/* \
	              /sys/bus/platform/drivers/vesa-framebuffer/*; do
		if [ -d "$device" ]; then
			walk_graphics=no
			break
		fi
	done

if [ "$walk_graphics" = "yes" ]; then
		class_add_modules backlight
		class_add_modules graphics
	fi

# catch old-style IDE
	if [ -e /sys/bus/ide/devices/ ]; then
		modules="$modules ide-gd_mod ide-cd"
	fi

if [ -e /sys/bus/scsi/devices/ ]; then
		modules="$modules sd_mod"
	fi

if [ -e /sys/bus/mmc/devices/ ]; then
		modules="$modules mmc_block"
	fi

if [ -e /sys/bus/virtio ] ; then
		modules="$modules virtio_pci virtio_mmio"
	fi

if [ -e /sys/bus/ps3_system_bus/ ]; then
		modules="$modules ps3disk ps3rom ps3-gelic ps3_sys_manager"
	fi

if [ -e /sys/bus/vio/ ]; then
		modules="$modules sunvnet sunvdc"
	fi

if [ -e /sys/devices/platform/edp-panel ]; then
		sys_walk_mod_add /sys/devices/platform/edp-panel
	fi

# shellcheck disable=SC2086
	manual_add_modules $modules
}

# The modules "most" classes added per default to the initramfs
auto_add_modules()
{
	local arg blockfuncs exclude exclude_dir
	local block_modules=
	local modules=

if [ "$#" -eq 0 ] ; then
		set -- base hw_random net ide scsi block ata dasd firewire mmc usb_storage fb virtual nx
	fi

blockfuncs="ahci_platform_get_resources|ata_scsi_ioctl|scsi_add_host|blk_cleanup_queue"
	blockfuncs="${blockfuncs}|register_mtd_blktrans|scsi_esp_register|register_virtio_device"
	blockfuncs="${blockfuncs}|usb_stor_disconnect|mmc_add_host|sdhci_add_host|scsi_add_host_with_dma"
	blockfuncs="${blockfuncs}|blk_mq_alloc_disk|blk_mq_alloc_request|blk_mq_destroy_queue|blk_cleanup_disk"
	case "$DPKG_ARCH" in
	arm64|armel|armhf|riscv64)
		blockfuncs="${blockfuncs}|dw_mc_probe|dw_mci_pltfm_register|nvme_init_ctrl"
	;;
	esac

for arg in "$@" ; do
		case "$arg" in
		base)
			modules="$modules btrfs ext2 ext3 ext4 f2fs"
			modules="$modules isofs jfs reiserfs squashfs udf xfs"
			modules="$modules nfs nfsv2 nfsv3 nfsv4"
			modules="$modules af_packet atkbd i8042 psmouse"
			modules="$modules virtio_pci virtio_mmio"
			# nls not automatically pulled in as ubuntu has built-in vfat
			modules="$modules vfat nls_cp437 nls_iso8859-1"

# Include most USB host and dual-role drivers
			modules="$modules ehci-hcd ehci-pci ehci-platform ohci-hcd ohci-pci"
			modules="$modules uhci-hcd usbhid xhci-hcd xhci-pci xhci-plat-hcd"
			modules="$modules =drivers/usb/typec"
			modules="$modules =drivers/usb/c67x00"
			modules="$modules =drivers/usb/renesas_usbhs"
			# and any extcon drivers for USB
			modules="$modules extcon-usb-gpio extcon-usbc-cros-ec"

# Include all keyboard drivers and all HID drivers
			# unless we're sure they don't support keyboards.
			# hid-*ff covers various game controllers with
			# force feedback.
			modules="$modules =drivers/input/keyboard"
			modules="$modules $(_list_modules_in_dir kernel/drivers/hid \
				'hid-*ff.ko' hid-a4tech.ko hid-cypress.ko \
				hid-dr.ko hid-elecom.ko hid-gyration.ko \
				hid-icade.ko hid-kensington.ko hid-kye.ko \
				hid-lcpower.ko hid-magicmouse.ko hid-ntrig.ko \
				hid-petalynx.ko hid-picolcd.ko hid-pl.ko \
				hid-ps3remote.ko hid-quanta.ko \
				'hid-roccat-ko*.ko' hid-roccat-pyra.ko \
				hid-saitek.ko hid-sensor-hub.ko hid-sony.ko \
				hid-speedlink.ko hid-tivo.ko hid-twinhan.ko \
				hid-uclogic.ko hid-wacom.ko hid-waltop.ko \
				hid-wiimote.ko hid-zydacron.ko)"
			# needed to access keyboard on some ChromeOS devices
			modules="$modules cros_ec_spi"
			# needed to access keyboard on MacBook Pro 2017
			modules="$modules intel_lpss_pci spi_pxa2xx_platform"
			# needed for keyboard on Surface Laptop 4
			modules="$modules surface_aggregator_registry"

# For Linux console access
			modules="$modules =drivers/tty/serial"

# Any of these might be needed by other drivers
			modules="$modules =drivers/bus"
			modules="$modules =drivers/i2c/muxes"
			modules="$modules =drivers/pci/controller"
			modules="$modules =drivers/pinctrl"

case "$DPKG_ARCH" in
			arm64|armel|armhf|riscv64)
				modules="$modules $(_list_modules_in_dir kernel/drivers/usb/host \
					hwa-hc.ko sl811_cs.ko sl811-hcd.ko \
					u132-hcd.ko whci-hcd.ko)"
				modules="$modules =drivers/clk"
				modules="$modules =drivers/i2c/busses"
				modules="$modules =drivers/gpio"
				modules="$modules =drivers/mfd"
				modules="$modules =drivers/nvmem"
				modules="$modules =drivers/phy"
				modules="$modules =drivers/power"
				modules="$modules =drivers/regulator"
				modules="$modules =drivers/reset"
				modules="$modules =drivers/spi"
				modules="$modules =drivers/spmi"
				modules="$modules =drivers/soc"
				modules="$modules =drivers/usb/chipidea"
				modules="$modules =drivers/usb/dwc2"
				modules="$modules =drivers/usb/dwc3"
				modules="$modules =drivers/usb/isp1760"
				modules="$modules =drivers/usb/musb"
				modules="$modules =drivers/usb/phy"

# Needed for periodic fsck
				modules="$modules =drivers/rtc"

# Add the axp20x_usb_power power supply driver,
				# required to initialize the USB host controllers
				# on a number of armhf systems
				modules="$modules axp20x_usb_power"
			;;
			esac
		;;
		hw_random)
			modules="$modules =drivers/char/hw_random"
		;;
		net)
			exclude="cdc_mbim|ipheth|qmi_wwan|sierra_net|veth|xen-netback"
			exclude_dir="isdn|net/ethernet|net/phy|net/team|uwb|wan|wireless"
			_call_dracut_install -P "/((${exclude})\.ko|(${exclude_dir})/)" \
				-s "eth_type_trans|register_virtio_device|usbnet_open" \
				"=drivers/net"
			modules="$modules =drivers/net/ethernet =drivers/net/mdio"
			modules="$modules =drivers/net/phy 8021q ipvlan"
		;;
		ide)
			modules="$modules =drivers/ide"
		;;
		mmc)
			modules="$modules =drivers/mmc"
		;;
		scsi)
			_call_dracut_install -s "${blockfuncs}|iscsi_register_transport" \
				"=drivers/scsi"
			modules="$modules be2iscsi bnx2i cxgb3i cxgb4i qedi qla4xxx"
			modules="$modules scsi_dh_alua scsi_dh_emc scsi_dh_rdac"
			modules="$modules mptfc mptsas mptscsih mptspi zfcp =drivers/ufs"
			# scsi_transport_srp should have been pulled in by =drivers/scsi
			modules="$modules scsi_transport_srp"
		;;
		ata)
			block_modules="$block_modules =drivers/ata"
		;;
		block)
			block_modules="$block_modules =drivers/block =drivers/nvme"
			block_modules="$block_modules =drivers/dax vmd"
			_call_dracut_install -s nvdimm_bus_register "=drivers/nvdimm" "=drivers/acpi"
			modules="$modules dax_pmem nd_pmem"
		;;
		ubi)
			modules="$modules deflate zlib lzo ubi ubifs"
		;;
		firewire)
			modules="$modules firewire-ohci firewire-sbp2"
		;;
		dasd)
			modules="$modules dasd_diag_mod dasd_eckd_mod dasd_fba_mod"
		;;
		usb_storage)
			modules="$modules =drivers/usb/storage"
		;;
		fb)
			# For machines that don't have a generic framebuffer device.
			modules="$modules rockchipdrm pwm-cros-ec pwm_bl pwm-rockchip panel-simple"
			modules="$modules analogix-anx6345 pwm-sun4i sun4i-drm sun8i-mixer panel-edp"
			# For panel/backlight on MNT Reform 2
			modules="$modules pwm_imx27 nwl-dsi ti-sn65dsi86 imx-dcss"
			modules="$modules mux-mmio mxsfb imx8mq-interconnect"
		;;
		fbdev)
			# Video drivers from drivers/video/fbdev
			modules="$modules efifb fbcon simplefb vesafb vga16fb"
		;;
		minimal_drm)
			# Minimal required set of Direct Rendering Manager (DRM) drivers for video
			modules="$modules =drivers/gpu/drm/tiny vboxvideo virtio-gpu"
			# if there is a privacy screen then its driver must be loaded before the
			# kms driver will bind, otherwise its probe() will return -EPROBE_DEFER
			# So include privacy screen providers
			# atm all providers live under drivers/platform/x86
			_call_dracut_install -s "drm_privacy_screen_register" "=drivers/platform/x86"
		;;
		virtual)
			# Hyper-V
			modules="$modules hv_vmbus hv_utils hv_netvsc hv_mouse hv_storvsc hyperv-keyboard"
		;;
		nx)
			# PowerPC NX Crypto Coprocessor
			modules="$modules nx-compress nx-compress-crypto nx-compress-platform"
			modules="$modules nx-compress-pseries nx-compress-powernv 842-decompress"
		;;
		esac
	done

# shellcheck disable=SC2086
	manual_add_modules $modules
	if [ -n "$block_modules" ]; then
		# shellcheck disable=SC2086
		_call_dracut_install -s "${blockfuncs}" $block_modules
	fi
}

# 'depmod' only looks at symbol dependencies and the 'softdep' module
# information field; there is no way for modules to declare weaker
# dependencies (modules that *might* be needed at run-time) through
# module information, Until this is fixed, we need to handle those
# hidden dependencies.
hidden_dep_add_modules()
{
	# shellcheck disable=SC2046
	manual_add_modules $(
		{
			cat "${DESTDIR}/lib/modules/${version}/modules.builtin"
			if [ -d "${DESTDIR}/lib/modules/${version}/kernel" ]; then
				find "${DESTDIR}/lib/modules/${version}/kernel" -name '*.ko*'
			fi
		} |
		while read -r module; do
			module="${module##*/}"
			module="${module%%.*}"
			case "$module" in
			libcrc32c)
				echo crc32c
				;;
			ubifs)
				echo deflate zlib lzo
				;;
			btrfs)
				echo crc32c
				;;
			f2fs)
				echo crc32
				;;
			mlx4_core)
				echo mlx4_ib
				;;
			mlx5_core)
				echo mlx5_ib
				;;
			i8042)
				echo psmouse
				;;
			nvme)
				echo vmd
				;;
			spi-rockchip)
				echo pl330
				;;
			dw_mmc-rockchip)
				echo rockchip-io-domain io-domain
				;;
			esac
		done
		)
}

# Find the source for a script file.  This is needed to work around
# temporary directories mounted with the noexec option.  The source
# will be on / or /usr which must be executable.
get_source()
{
	if [ -z "$scriptdir" ]; then
		echo "${initdir}/$1"
	elif [ -f "${CONFDIR}${scriptdir}/$1" ]; then
		echo "${CONFDIR}${scriptdir}/$1"
	else
		echo "/usr/share/initramfs-tools${scriptdir}/$1"
	fi
}

set_initlist()
{
	unset initlist
	for si_x in "${initdir}"/*; do
		# skip empty dirs without warning
		[ "${si_x}" = "${initdir}/*" ] && return

# only allow variable name chars
		case "${si_x#"${initdir}"/}" in
		*[![:alnum:]\._-]*)
			[ "${verbose}" = "y" ] \
			&& echo "$si_x ignored: not alphanumeric or '_' file" >&2
			continue
			;;
		esac

# skip directories
		if [ -d "${si_x}" ]; then
			[ "${verbose}" = "y" ] \
			&& echo "$si_x ignored: a directory" >&2
			continue
		fi

si_x="$(get_source "${si_x#"${initdir}"/}")"

# skip non executable scripts
		if [ ! -x "${si_x}" ]; then
			[ "${verbose}" = "y" ] \
			&& echo "$si_x ignored: not executable" >&2
			continue
		fi

# skip bad syntax
		if ! sh -n "${si_x}" ; then
			[ "${verbose}" = "y" ] \
			&& echo "$si_x ignored: bad syntax" >&2
			continue
		fi

initlist="${initlist:-} ${si_x##*/}"
	done
}

get_prereq_pairs()
{
	set_initlist
	for gp_x in ${initlist:-}; do
		echo "${gp_x} ${gp_x}"
		gp_src="$(get_source "$gp_x")"
		prereqs=$("${gp_src}" prereqs)
		for prereq in ${prereqs}; do
			echo "${prereq} ${gp_x}"
		done
	done
}

# cache boot scripts order
cache_run_scripts()
{
	DESTDIR=${1}
	scriptdir=${2}
	initdir=${DESTDIR}${scriptdir}
	[ ! -d "${initdir}" ] && return

true > "${initdir}/ORDER"
	runlist=$(get_prereq_pairs | tsort)
	for crs_x in ${runlist}; do
		[ -f "${initdir}/${crs_x}" ] || continue
		echo "${scriptdir}/${crs_x} \"\$@\"" >> "${initdir}/ORDER"
		echo "[ -e /conf/param.conf ] && . /conf/param.conf" >> "${initdir}/ORDER"
	done
}

call_scripts()
{
	set -e
	for cs_x in ${runlist}; do
		[ -f "${initdir}/${cs_x}" ] || continue
		if [ "$call_scripts_optional" = "y" ]; then
			option=$(sed '/^OPTION=/!d;$d;s/^OPTION=//;s/[[:space:]]*$//' "${initdir}/${cs_x}")
			# shellcheck disable=SC1083,2086
			[ -z "${option}" ] || eval test -n \"\${$option}\" -a \"\${$option}\" != \"n\" || continue
		fi

# mkinitramfs verbose output
		if [ "${verbose}" = "y" ]; then
			echo "Calling hook ${cs_x}"
		fi
		"${initdir}/${cs_x}" && ec=$? || ec=$?
		# allow hooks to abort build:
		if [ "$ec" -ne 0 ]; then
			echo "E: ${initdir}/${cs_x} failed with return $ec." >&2
			# only errexit on mkinitramfs
			[ -n "${version}" ] && exit "$ec"
		fi
		# allow boot scripts to modify exported boot parameters
		if [ -e /conf/param.conf ]; then
			. /conf/param.conf
		fi
	done
	set +e
}

run_scripts()
{
	scriptdir=${2:-}
	initdir=${1}
	[ ! -d "${initdir}" ] && return

runlist=$(get_prereq_pairs | tsort)
	call_scripts "$scriptdir"
}

run_scripts_optional()
{
	call_scripts_optional=y
	run_scripts "$@"
}

add_dns() {
	local destdir="$1" multiarch_dir="" nsswitch="" lib="" f=""
	# find the multiarch lib dir (for example /lib/x86_64-linux-gnu)
	multiarch_dir=$(ldd /bin/sh | sed -En 's;^.*/lib(/lib[^/]*prof)?/([^/]+)/libc\.so\..*$;\2;p')
	if [ -z "$multiarch_dir" ]; then
		echo "WARNING: no multiarch_dir found for adding dns." 1>&2
		return
	fi
	nsswitch="$destdir/etc/nsswitch.conf"
	if ! grep -qs "^hosts:" "$nsswitch"; then
		echo "hosts: files dns" >> "$nsswitch"
	fi
	local found=""
	for lib in libnss_files libnss_dns libresolv; do
		found=""
		for f in "/lib/$multiarch_dir/$lib.so".?; do
			[ -e "$f" ] || continue
			[ "$verbose" = "y" ] && echo "dns: $lib: $f"
			copy_file library "$f"
			found="$f"
		done
		[ -n "$found" ] || echo "WARNING: no /lib/$multiarch_dir/$lib.? file" 1>&2
	done
	return 0
}

${this.title}

Code Editor : hook-functions