TrxShell [ mangaberri.com ]

Name	Size	Permission
archive	[ DIR ]	drwxr-xr-x
Makefile	3.08 KB	-rw-r--r--
Makefile.freebsd	1.98 KB	-rw-r--r--
README	776 B	-rw-r--r--
forwarded_sense.txt	296 B	-rw-r--r--
nvme_dev_self_test.hex	806 B	-rw-r--r--
nvme_identify_ctl.hex	1.17 KB	-rw-r--r--
nvme_read_ctl.hex	1.79 KB	-rw-r--r--
nvme_write_ctl.hex	1.8 KB	-rw-r--r--
reassign_addr.txt	465 B	-rw-r--r--
ref_sense.txt	305 B	-rw-r--r--
scsi_inquiry.c	4.09 KB	-rw-r--r--
sdiag_sas_p0_cjtpat.txt	405 B	-rw-r--r--
sdiag_sas_p0_prbs9.txt	407 B	-rw-r--r--
sdiag_sas_p1_cjtpat.txt	464 B	-rw-r--r--
sdiag_sas_p1_idle.txt	560 B	-rw-r--r--
sdiag_sas_p1_prbs15.txt	408 B	-rw-r--r--
sdiag_sas_p1_stop.txt	359 B	-rw-r--r--
sg__sat_identify.c	7.55 KB	-rw-r--r--
sg__sat_phy_event.c	12.02 KB	-rw-r--r--
sg__sat_set_features.c	9.7 KB	-rw-r--r--
sg_compare_and_write.txt	2.42 KB	-rw-r--r--
sg_excl.c	5.98 KB	-rw-r--r--
sg_persist_tst.sh	3.54 KB	-rwxr-xr-x
sg_sat_chk_power.c	8.95 KB	-rw-r--r--
sg_sat_smart_rd_data.c	6.4 KB	-rw-r--r--
sg_simple1.c	5.87 KB	-rw-r--r--
sg_simple16.c	3.41 KB	-rw-r--r--
sg_simple2.c	6.59 KB	-rw-r--r--
sg_simple3.c	6.46 KB	-rw-r--r--
sg_simple4.c	7.25 KB	-rw-r--r--
sg_simple5.c	7.47 KB	-rw-r--r--
sg_unmap_example.txt	1.53 KB	-rw-r--r--
sgq_dd.c	37.77 KB	-rw-r--r--
transport_ids.txt	1.1 KB	-rw-r--r--

Code Editor : sg__sat_set_features.c

/*
 * Copyright (c) 2006-2020 Douglas Gilbert.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */

#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <getopt.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>

#include "sg_lib.h"
#include "sg_io_linux.h"

/* This program performs a ATA PASS-THROUGH (16) SCSI command in order
   to perform an ATA SET FEATURES command. See http://www.t10.org
   SAT draft at time of writing: sat-r09.pdf

Invocation:
        sg_sat_set_features [-c <n>] [-f <n>] [-h] [-L <n>] [-v] [-V] <device>

#define SAT_ATA_PASS_THROUGH16 0x85
#define SAT_ATA_PASS_THROUGH16_LEN 16
#define SAT_ATA_RETURN_DESC 9  /* ATA Return (sense) Descriptor */

#define ATA_SET_FEATURES 0xef

#define EBUFF_SZ 512

static char * version_str = "1.06 20201125";

static struct option long_options[] = {
        {"count", required_argument, 0, 'c'},
        {"chk_cond", no_argument, 0, 'C'},
        {"feature", required_argument, 0, 'f'},
        {"help", no_argument, 0, 'h'},
        {"lba", required_argument, 0, 'L'},
        {"verbose", no_argument, 0, 'v'},
        {"version", no_argument, 0, 'V'},
        {0, 0, 0, 0},
};

void usage()
{
    fprintf(stderr, "Usage: "
          "sg_sat_set_features [--count=C] [--chk_cond] [--feature=F] "
          "[--help]\n"
          "                           [-lba=LBA] [--verbose] [--version] "
          "DEVICE\n"
          "  where:\n"
          "    --count=C|-c C       count field contents (def: 0)\n"
          "    --chk_cond|-C        set chk_cond field in pass-through "
          "(def: 0)\n"
          "    --feature=F|-f F     feature field contents (def: 0)\n"
          "    --help|-h            output this usage message\n"
          "    --lba=LBA| -L LBA    LBA field contents (def: 0)\n"
          "    --verbose|-v         increase verbosity\n"
          "    --version|-V         print version string and exit\n\n"
          "Sends an ATA SET FEATURES command via a SAT pass through.\n"
          "Primary feature code is placed in '--feature=F' with '--count=C' "
          "and\n"
          "'--lba=LBA' being auxiliaries for some features.  The arguments C, "
          "F and LBA\n"
          "are decimal unless prefixed by '0x' or have a trailing 'h'.\n"
          "Example enabling write cache: 'sg_sat_set_feature --feature=2 "
          "/dev/sdc'\n");
}

int main(int argc, char * argv[])
{
    int sg_fd, c, k;
    uint8_t apt_cdb[SAT_ATA_PASS_THROUGH16_LEN] =
                {SAT_ATA_PASS_THROUGH16, 0, 0, 0, 0, 0, 0, 0,
                 0, 0, 0, 0, 0, 0, 0, 0};
    sg_io_hdr_t io_hdr;
    char device_name[256];
    char ebuff[EBUFF_SZ];
    uint8_t sense_buffer[64];
    int count = 0;
    int feature = 0;
    int lba = 0;
    int verbose = 0;
    int extend = 0;
    int chk_cond = 0;   /* set to 1 to read register(s) back */
    int protocol = 3;   /* non-data data-in */
    int t_dir = 1;      /* 0 -> to device, 1 -> from device */
    int byte_block = 1; /* 0 -> bytes, 1 -> 512 byte blocks */
    int t_length = 0;   /* 0 -> no data transferred, 2 -> sector count */
    const uint8_t * bp = NULL;

memset(device_name, 0, sizeof(device_name));
    while (1) {
        int option_index = 0;

c = getopt_long(argc, argv, "c:Cf:hL:vV", long_options,
                        &option_index);
        if (c == -1)
            break;

switch (c) {
        case 'c':
            count = sg_get_num(optarg);
            if ((count < 0) || (count > 255)) {
                fprintf(stderr, "bad argument for '--count'\n");
                return SG_LIB_SYNTAX_ERROR;
            }
            break;
        case 'C':
            chk_cond = 1;
            break;
        case 'f':
            feature = sg_get_num(optarg);
            if ((feature < 0) || (feature > 255)) {
                fprintf(stderr, "bad argument for '--feature'\n");
                return SG_LIB_SYNTAX_ERROR;
            }
            break;
        case 'h':
        case '?':
            usage();
            return 0;
        case 'L':
            lba = sg_get_num(optarg);
            if ((lba < 0) || (lba > 255)) {
                fprintf(stderr, "bad argument for '--lba'\n");
                return SG_LIB_SYNTAX_ERROR;
            }
            break;
        case 'v':
            ++verbose;
            break;
        case 'V':
            fprintf(stderr, "version: %s\n", version_str);
            return 0;
        default:
            fprintf(stderr, "unrecognised option code 0x%x ??\n", c);
            usage();
            return SG_LIB_SYNTAX_ERROR;
        }
    }
    if (optind < argc) {
        if ('\0' == device_name[0]) {
            strncpy(device_name, argv[optind], sizeof(device_name) - 1);
            device_name[sizeof(device_name) - 1] = '\0';
            ++optind;
        }
        if (optind < argc) {
            for (; optind < argc; ++optind)
                fprintf(stderr, "Unexpected extra argument: %s\n",
                        argv[optind]);
            usage();
            return SG_LIB_SYNTAX_ERROR;
        }
    }

if ('\0' == device_name[0]) {
        fprintf(stderr, "missing device name!\n");
        usage();
        return 1;
    }

if ((sg_fd = open(device_name, O_RDWR)) < 0) {
        snprintf(ebuff, EBUFF_SZ,
                 "sg_sat_set_features: error opening file: %s", device_name);
        perror(ebuff);
        return 1;
    }

/* Prepare ATA PASS-THROUGH COMMAND (16) command */
    apt_cdb[14] = ATA_SET_FEATURES;
    apt_cdb[1] = (protocol << 1) | extend;
    apt_cdb[2] = (chk_cond << 5) | (t_dir << 3) | (byte_block << 2) |
                 t_length;
    apt_cdb[4] = feature;
    apt_cdb[6] = count;
    apt_cdb[8] = lba & 0xff;
    apt_cdb[10] = (lba >> 8) & 0xff;
    apt_cdb[12] = (lba >> 16) & 0xff;
    if (verbose) {
        fprintf(stderr, "    ata pass through(16) cdb: ");
        for (k = 0; k < SAT_ATA_PASS_THROUGH16_LEN; ++k)
            fprintf(stderr, "%02x ", apt_cdb[k]);
        fprintf(stderr, "\n");
    }

memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
    io_hdr.interface_id = 'S';
    io_hdr.cmd_len = sizeof(apt_cdb);
    /* io_hdr.iovec_count = 0; */  /* memset takes care of this */
    io_hdr.mx_sb_len = sizeof(sense_buffer);
    io_hdr.dxfer_direction = SG_DXFER_NONE;
    io_hdr.dxfer_len = 0;
    io_hdr.dxferp = NULL;
    io_hdr.cmdp = apt_cdb;
    io_hdr.sbp = sense_buffer;
    io_hdr.timeout = 20000;     /* 20000 millisecs == 20 seconds */
    /* io_hdr.flags = 0; */     /* take defaults: indirect IO, etc */
    /* io_hdr.pack_id = 0; */
    /* io_hdr.usr_ptr = NULL; */

if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) {
        perror("sg_sat_set_features: SG_IO ioctl error");
        close(sg_fd);
        return 1;
    }

/* error processing: N.B. expect check condition, no sense ... !! */
    switch (sg_err_category3(&io_hdr)) {
    case SG_LIB_CAT_CLEAN:
        break;
    case SG_LIB_CAT_RECOVERED:  /* sat-r09 uses this sk */
    case SG_LIB_CAT_NO_SENSE:   /* earlier SAT drafts used this */
        bp = sg_scsi_sense_desc_find(sense_buffer, sizeof(sense_buffer),
                                     SAT_ATA_RETURN_DESC);
        if (NULL == bp) {
            if (verbose > 1)
                printf("ATA Return Descriptor expected in sense but not "
                       "found\n");
            sg_chk_n_print3("ATA_16 command error", &io_hdr, 1);
        } else if (verbose)
            sg_chk_n_print3("ATA Return Descriptor", &io_hdr, 1);
        if (bp && bp[3]) {
            if (bp[3] & 0x4)
                printf("error in returned FIS: aborted command\n");
            else
                printf("error=0x%x, status=0x%x\n", bp[3], bp[13]);
        }
        break;
    default:
        fprintf(stderr, "unexpected SCSI sense category\n");
        bp = sg_scsi_sense_desc_find(sense_buffer, sizeof(sense_buffer),
                                     SAT_ATA_RETURN_DESC);
        if (NULL == bp)
            sg_chk_n_print3("ATA_16 command error", &io_hdr, 1);
        else if (verbose)
            sg_chk_n_print3("ATA Return Descriptor, as expected",
                             &io_hdr, 1);
        if (bp && bp[3]) {
            if (bp[3] & 0x4)
                printf("error in returned FIS: aborted command\n");
            else
                printf("error=0x%x, status=0x%x\n", bp[3], bp[13]);
        }
        break;
    }

close(sg_fd);
    return 0;
}

${this.title}

Code Editor : sg__sat_set_features.c