TrxShell [ mangaberri.com ]

Name	Size	Permission
archive	[ DIR ]	drwxr-xr-x
Makefile	3.08 KB	-rw-r--r--
Makefile.freebsd	1.98 KB	-rw-r--r--
README	776 B	-rw-r--r--
forwarded_sense.txt	296 B	-rw-r--r--
nvme_dev_self_test.hex	806 B	-rw-r--r--
nvme_identify_ctl.hex	1.17 KB	-rw-r--r--
nvme_read_ctl.hex	1.79 KB	-rw-r--r--
nvme_write_ctl.hex	1.8 KB	-rw-r--r--
reassign_addr.txt	465 B	-rw-r--r--
ref_sense.txt	305 B	-rw-r--r--
scsi_inquiry.c	4.09 KB	-rw-r--r--
sdiag_sas_p0_cjtpat.txt	405 B	-rw-r--r--
sdiag_sas_p0_prbs9.txt	407 B	-rw-r--r--
sdiag_sas_p1_cjtpat.txt	464 B	-rw-r--r--
sdiag_sas_p1_idle.txt	560 B	-rw-r--r--
sdiag_sas_p1_prbs15.txt	408 B	-rw-r--r--
sdiag_sas_p1_stop.txt	359 B	-rw-r--r--
sg__sat_identify.c	7.55 KB	-rw-r--r--
sg__sat_phy_event.c	12.02 KB	-rw-r--r--
sg__sat_set_features.c	9.7 KB	-rw-r--r--
sg_compare_and_write.txt	2.42 KB	-rw-r--r--
sg_excl.c	5.98 KB	-rw-r--r--
sg_persist_tst.sh	3.54 KB	-rwxr-xr-x
sg_sat_chk_power.c	8.95 KB	-rw-r--r--
sg_sat_smart_rd_data.c	6.4 KB	-rw-r--r--
sg_simple1.c	5.87 KB	-rw-r--r--
sg_simple16.c	3.41 KB	-rw-r--r--
sg_simple2.c	6.59 KB	-rw-r--r--
sg_simple3.c	6.46 KB	-rw-r--r--
sg_simple4.c	7.25 KB	-rw-r--r--
sg_simple5.c	7.47 KB	-rw-r--r--
sg_unmap_example.txt	1.53 KB	-rw-r--r--
sgq_dd.c	37.77 KB	-rw-r--r--
transport_ids.txt	1.1 KB	-rw-r--r--

Code Editor : sg_simple3.c

#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include "sg_lib.h"
#include "sg_io_linux.h"

/* This is a simple program executing a SCSI INQUIRY command and a
   TEST UNIT READY command using the SCSI generic (sg) driver.
   There is another variant of this program called "sg_simple1".
   This variant demonstrates using the scatter gather facility in
   the sg_io_hdr interface to break an INQUIRY response into its
   component parts.

*  Copyright (C) 1999-2016 D. Gilbert
*  This program is free software; you can redistribute it and/or modify
*  it under the terms of the GNU General Public License as published by
*  the Free Software Foundation; either version 2, or (at your option)
*  any later version.

Invocation: sg_simple3 [-x] <sg_device>

Version 03.59 (20160528)

6 byte INQUIRY command:
[0x12][   |lu][pg cde][res   ][al len][cntrl ]

6 byte TEST UNIT READY command:
[0x00][   |lu][res   ][res   ][res   ][res   ]

#define INQ_REPLY_BASE_LEN 8
#define INQ_REPLY_VID_LEN 8
#define INQ_REPLY_PID_LEN 16
#define INQ_REPLY_PREV_LEN 4
#define INQ_REPLY_IOVEC_COUNT 4
#define INQ_CMD_LEN 6
#define TUR_CMD_LEN 6

#define EBUFF_SZ 256

int main(int argc, char * argv[])
{
    int sg_fd, k, ok;
    unsigned char inq_cdb[INQ_CMD_LEN] = {0x12, 0, 0, 0,
                    INQ_REPLY_BASE_LEN + INQ_REPLY_VID_LEN +
                    INQ_REPLY_PID_LEN + INQ_REPLY_PREV_LEN, 0};
    unsigned char tur_cdb[TUR_CMD_LEN] = {0x00, 0, 0, 0, 0, 0};
    sg_iovec_t iovec[INQ_REPLY_IOVEC_COUNT];
    unsigned char inqBaseBuff[INQ_REPLY_BASE_LEN];
    char inqVidBuff[INQ_REPLY_VID_LEN];
    char inqPidBuff[INQ_REPLY_PID_LEN];
    char inqPRevBuff[INQ_REPLY_PREV_LEN];
    sg_io_hdr_t io_hdr;
    char * file_name = 0;
    char ebuff[EBUFF_SZ];
    unsigned char sense_buffer[32];
    int do_extra = 0;

for (k = 1; k < argc; ++k) {
        if (0 == memcmp("-x", argv[k], 2))
            do_extra = 1;
        else if (*argv[k] == '-') {
            printf("Unrecognized switch: %s\n", argv[k]);
            file_name = 0;
            break;
        }
        else if (0 == file_name)
            file_name = argv[k];
        else {
            printf("too many arguments\n");
            file_name = 0;
            break;
        }
    }
    if (0 == file_name) {
        printf("Usage: 'sg_simple3 [-x] <sg_device>'\n");
        return 1;
    }

/* N.B. An access mode of O_RDWR is required for some SCSI commands */
    if ((sg_fd = open(file_name, O_RDONLY)) < 0) {
        snprintf(ebuff, EBUFF_SZ,
                 "sg_simple3: error opening file: %s", file_name);
        perror(ebuff);
        return 1;
    }
    /* Just to be safe, check we have a new sg device by trying an ioctl */
    if ((ioctl(sg_fd, SG_GET_VERSION_NUM, &k) < 0) || (k < 30000)) {
        printf("sg_simple3: %s doesn't seem to be an new sg device\n",
               file_name);
        close(sg_fd);
        return 1;
    }

/* Prepare INQUIRY command */
    memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
    io_hdr.interface_id = 'S';
    io_hdr.cmd_len = sizeof(inq_cdb);
    io_hdr.iovec_count = INQ_REPLY_IOVEC_COUNT;
    io_hdr.mx_sb_len = sizeof(sense_buffer);
    io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
    io_hdr.dxfer_len = INQ_REPLY_BASE_LEN + INQ_REPLY_VID_LEN +
                       INQ_REPLY_PID_LEN + INQ_REPLY_PREV_LEN;
    iovec[0].iov_base = inqBaseBuff;
    iovec[0].iov_len = INQ_REPLY_BASE_LEN;
    iovec[1].iov_base = inqVidBuff;
    iovec[1].iov_len = INQ_REPLY_VID_LEN;
    iovec[2].iov_base = inqPidBuff;
    iovec[2].iov_len = INQ_REPLY_PID_LEN;
    iovec[3].iov_base = inqPRevBuff;
    iovec[3].iov_len = INQ_REPLY_PREV_LEN;
    io_hdr.dxferp = iovec;
    io_hdr.cmdp = inq_cdb;
    io_hdr.sbp = sense_buffer;
    io_hdr.timeout = 20000;     /* 20000 millisecs == 20 seconds */
    /* io_hdr.flags = 0; */     /* take defaults: indirect IO, etc */
    /* io_hdr.pack_id = 0; */
    /* io_hdr.usr_ptr = NULL; */

if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) {
        perror("sg_simple3: Inquiry SG_IO ioctl error");
        close(sg_fd);
        return 1;
    }

/* now for the error processing */
    ok = 0;
    switch (sg_err_category3(&io_hdr)) {
    case SG_LIB_CAT_CLEAN:
        ok = 1;
        break;
    case SG_LIB_CAT_RECOVERED:
        printf("Recovered error on INQUIRY, continuing\n");
        ok = 1;
        break;
    default: /* won't bother decoding other categories */
        sg_chk_n_print3("INQUIRY command error", &io_hdr, 1);
        break;
    }

if (ok) { /* output result if it is available */
        char * p = (char *)inqBaseBuff;
        int f = (int)*(p + 7);
        printf("Some of the INQUIRY command's results:\n");
        printf("  %.8s  %.16s  %.4s  ", inqVidBuff, inqPidBuff, inqPRevBuff);
        printf("[wide=%d sync=%d cmdque=%d sftre=%d]\n",
               !!(f & 0x20), !!(f & 0x10), !!(f & 2), !!(f & 1));
        /* Extra info, not necessary to look at */
        if (do_extra)
            printf("INQUIRY duration=%u millisecs, resid=%d, msg_status=%d\n",
                   io_hdr.duration, io_hdr.resid, (int)io_hdr.msg_status);
    }

/* Prepare TEST UNIT READY command */
    memset(&io_hdr, 0, sizeof(sg_io_hdr_t));
    io_hdr.interface_id = 'S';
    io_hdr.cmd_len = sizeof(tur_cdb);
    io_hdr.mx_sb_len = sizeof(sense_buffer);
    io_hdr.dxfer_direction = SG_DXFER_NONE;
    io_hdr.cmdp = tur_cdb;
    io_hdr.sbp = sense_buffer;
    io_hdr.timeout = 20000;     /* 20000 millisecs == 20 seconds */

if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) {
        perror("sg_simple3: Test Unit Ready SG_IO ioctl error");
        close(sg_fd);
        return 1;
    }

/* now for the error processing */
    ok = 0;
    switch (sg_err_category3(&io_hdr)) {
    case SG_LIB_CAT_CLEAN:
        ok = 1;
        break;
    case SG_LIB_CAT_RECOVERED:
        printf("Recovered error on Test Unit Ready, continuing\n");
        ok = 1;
        break;
    default: /* won't bother decoding other categories */
        sg_chk_n_print3("Test Unit Ready command error", &io_hdr, 1);
        break;
    }

if (ok)
        printf("Test Unit Ready successful so unit is ready!\n");
    else
        printf("Test Unit Ready failed so unit may _not_ be ready!\n");

if (do_extra)
        printf("TEST UNIT READY duration=%u millisecs, resid=%d, "
                "msg_status=%d\n", io_hdr.duration, io_hdr.resid,
                (int)io_hdr.msg_status);

close(sg_fd);
    return 0;
}

${this.title}

Code Editor : sg_simple3.c