TrxShell [ mangaberri.com ]

/ usr / bin / [ HOME SHELL ]

Name	Size	Permission
NF	963 B	-rwxr-xr-x
VGAuthService	130.54 KB	-rwxr-xr-x
[	54.44 KB	-rwxr-xr-x
aa-enabled	18.3 KB	-rwxr-xr-x
aa-exec	18.3 KB	-rwxr-xr-x
aa-features-abi	18.3 KB	-rwxr-xr-x
ab	58.43 KB	-rwxr-xr-x
acpidbg	1.58 KB	-rwxr-xr-x
add-apt-repository	16.04 KB	-rwxr-xr-x
addpart	14.38 KB	-rwxr-xr-x
apport-bug	2.27 KB	-rwxr-xr-x
apport-cli	13.31 KB	-rwxr-xr-x
apport-collect	2.27 KB	-rwxr-xr-x
apport-unpack	3.7 KB	-rwxr-xr-x
appstreamcli	138.23 KB	-rwxr-xr-x
apropos	47.28 KB	-rwxr-xr-x
apt	18.38 KB	-rwxr-xr-x
apt-add-repository	16.04 KB	-rwxr-xr-x
apt-cache	86.47 KB	-rwxr-xr-x
apt-cdrom	26.47 KB	-rwxr-xr-x
apt-config	30.39 KB	-rwxr-xr-x
apt-extracttemplates	22.47 KB	-rwxr-xr-x
apt-ftparchive	222.48 KB	-rwxr-xr-x
apt-get	50.47 KB	-rwxr-xr-x
apt-key	27.99 KB	-rwxr-xr-x
apt-mark	54.47 KB	-rwxr-xr-x
apt-sortpkgs	50.4 KB	-rwxr-xr-x
arch	34.51 KB	-rwxr-xr-x
aria_chk	5.52 MB	-rwxr-xr-x
aria_dump_log	5.31 MB	-rwxr-xr-x
aria_ftdump	5.32 MB	-rwxr-xr-x
aria_pack	5.35 MB	-rwxr-xr-x
aria_read_log	5.48 MB	-rwxr-xr-x
aulast	18.3 KB	-rwxr-xr-x
aulastlog	14.3 KB	-rwxr-xr-x
ausyscall	14.3 KB	-rwxr-xr-x
automat-visualize3	984 B	-rwxr-xr-x
auvirt	38.38 KB	-rwxr-xr-x
awk	722.5 KB	-rwxr-xr-x
b2sum	54.51 KB	-rwxr-xr-x
base32	38.51 KB	-rwxr-xr-x
base64	38.51 KB	-rwxr-xr-x
basename	34.51 KB	-rwxr-xr-x
basenc	46.51 KB	-rwxr-xr-x
bash	1.38 MB	-rwxr-xr-x
bashbug	6.82 KB	-rwxr-xr-x
bc	90.82 KB	-rwxr-xr-x
boltctl	122.84 KB	-rwxr-xr-x
bpftrace	2.15 MB	-rwxr-xr-x
bpftrace-aotrt	985.37 KB	-rwxr-xr-x
btrfs	1001.25 KB	-rwxr-xr-x
btrfs-convert	576.3 KB	-rwxr-xr-x
btrfs-find-root	520.3 KB	-rwxr-xr-x
btrfs-image	552.3 KB	-rwxr-xr-x
btrfs-map-logical	520.3 KB	-rwxr-xr-x
btrfs-select-super	516.3 KB	-rwxr-xr-x
btrfsck	1001.25 KB	-rwxr-xr-x
btrfstune	544.3 KB	-rwxr-xr-x
busctl	94.59 KB	-rwxr-xr-x
busybox	2.03 MB	-rwxr-xr-x
byobu	8.5 KB	-rwxr-xr-x
byobu-config	996 B	-rwxr-xr-x
byobu-ctrl-a	4.66 KB	-rwxr-xr-x
byobu-disable	1.26 KB	-rwxr-xr-x
byobu-disable-prompt	1.31 KB	-rwxr-xr-x
byobu-enable	1.15 KB	-rwxr-xr-x
byobu-enable-prompt	1.42 KB	-rwxr-xr-x
byobu-export	1.39 KB	-rwxr-xr-x
byobu-janitor	7.04 KB	-rwxr-xr-x
byobu-keybindings	1.47 KB	-rwxr-xr-x
byobu-launch	3.25 KB	-rwxr-xr-x
byobu-launcher	1.87 KB	-rwxr-xr-x
byobu-launcher-install	2.47 KB	-rwxr-xr-x
byobu-launcher-uninstall	1.52 KB	-rwxr-xr-x
byobu-layout	3.27 KB	-rwxr-xr-x
byobu-prompt	1.13 KB	-rwxr-xr-x
byobu-quiet	1.38 KB	-rwxr-xr-x
byobu-reconnect-sockets	3.22 KB	-rwxr-xr-x
byobu-screen	8.5 KB	-rwxr-xr-x
byobu-select-backend	1.42 KB	-rwxr-xr-x
byobu-select-profile	5.06 KB	-rwxr-xr-x
byobu-select-session	1012 B	-rwxr-xr-x
byobu-shell	1.66 KB	-rwxr-xr-x
byobu-silent	1.28 KB	-rwxr-xr-x
byobu-status	5.87 KB	-rwxr-xr-x
byobu-status-detail	1.18 KB	-rwxr-xr-x
byobu-tmux	8.5 KB	-rwxr-xr-x
byobu-ugraph	4.56 KB	-rwxr-xr-x
byobu-ulevel	11.71 KB	-rwxr-xr-x
c_rehash	6.68 KB	-rwxr-xr-x
captoinfo	90.41 KB	-rwxr-xr-x
cat	38.46 KB	-rwxr-xr-x
catman	30.77 KB	-rwxr-xr-x
certbot	958 B	-rwxr-xr-x
cftp3	224 B	-rwxr-xr-x
cgi-fcgi	18.15 KB	-rwxr-xr-x
chage	70.49 KB	-rwxr-sr-x
chardet	221 B	-rwxr-xr-x
chardetect	221 B	-rwxr-xr-x
chattr	14.31 KB	-rwxr-xr-x
chcon	58.51 KB	-rwxr-xr-x
checkgid	14.3 KB	-rwxr-xr-x
chfn	71.09 KB	-rwsr-xr-x
chgrp	58.51 KB	-rwxr-xr-x
chmod	54.51 KB	-rwxr-xr-x
choom	22.38 KB	-rwxr-xr-x
chown	58.51 KB	-rwxr-xr-x
chrt	30.38 KB	-rwxr-xr-x
chsh	43.71 KB	-rwsr-xr-x
chvt	14.37 KB	-rwxr-xr-x
cifsiostat	26.45 KB	-rwxr-xr-x
ckbcomp	147.14 KB	-rwxr-xr-x
ckeygen3	227 B	-rwxr-xr-x
cksum	102.52 KB	-rwxr-xr-x
clambc	6.68 MB	-rwxr-xr-x
clamscan	162.38 KB	-rwxr-xr-x
clamsubmit	126.38 KB	-rwxr-xr-x
clear	14.31 KB	-rwxr-xr-x
clear_console	14.23 KB	-rwxr-xr-x
cloud-id	966 B	-rwxr-xr-x
cloud-init	970 B	-rwxr-xr-x
cloud-init-per	2.06 KB	-rwxr-xr-x
cmp	42.39 KB	-rwxr-xr-x
codepage	14.3 KB	-rwxr-xr-x
col	22.38 KB	-rwxr-xr-x
col1	963 B	-rwxr-xr-x
col2	963 B	-rwxr-xr-x
col3	963 B	-rwxr-xr-x
col4	963 B	-rwxr-xr-x
col5	963 B	-rwxr-xr-x
col6	963 B	-rwxr-xr-x
col7	963 B	-rwxr-xr-x
col8	963 B	-rwxr-xr-x
col9	963 B	-rwxr-xr-x
colcrt	14.38 KB	-rwxr-xr-x
colrm	14.38 KB	-rwxr-xr-x
column	38.38 KB	-rwxr-xr-x
comm	38.52 KB	-rwxr-xr-x
conch3	225 B	-rwxr-xr-x
corelist	15.01 KB	-rwxr-xr-x
cp	138.52 KB	-rwxr-xr-x
cpan	8.16 KB	-rwxr-xr-x
cpan5.38-x86_64-linux-gnu	8.18 KB	-rwxr-xr-x
cpio	137.67 KB	-rwxr-xr-x
cpupower	1.58 KB	-rwxr-xr-x
crontab	38.73 KB	-rwxr-sr-x
csplit	50.51 KB	-rwxr-xr-x
ctail	960 B	-rwxr-xr-x
ctstat	22.66 KB	-rwxr-xr-x
curl	290.32 KB	-rwxr-xr-x
cut	38.51 KB	-rwxr-xr-x
cvtsudoers	321.1 KB	-rwxr-xr-x
dash	126.74 KB	-rwxr-xr-x
date	106.51 KB	-rwxr-xr-x
dbilogstrip	1.35 KB	-rwxr-xr-x
dbiprof	6.06 KB	-rwxr-xr-x
dbiproxy	5.27 KB	-rwxr-xr-x
dbpmda	94.8 KB	-rwxr-xr-x
dbus-cleanup-sockets	14.29 KB	-rwxr-xr-x
dbus-daemon	230.64 KB	-rwxr-xr-x
dbus-monitor	26.3 KB	-rwxr-xr-x
dbus-run-session	14.3 KB	-rwxr-xr-x
dbus-send	30.29 KB	-rwxr-xr-x
dbus-update-activation-environ...	14.29 KB	-rwxr-xr-x
dbus-uuidgen	14.29 KB	-rwxr-xr-x
dbxtool	30.3 KB	-rwxr-xr-x
dd	70.54 KB	-rwxr-xr-x
deallocvt	14.37 KB	-rwxr-xr-x
deb-systemd-helper	23.79 KB	-rwxr-xr-x
deb-systemd-invoke	6.97 KB	-rwxr-xr-x
debconf	2.8 KB	-rwxr-xr-x
debconf-apt-progress	11.57 KB	-rwxr-xr-x
debconf-communicate	623 B	-rwxr-xr-x
debconf-copydb	1.68 KB	-rwxr-xr-x
debconf-escape	668 B	-rwxr-xr-x
debconf-set-selections	3.14 KB	-rwxr-xr-x
debconf-show	1.78 KB	-rwxr-xr-x
debian-distro-info	30.95 KB	-rwxr-xr-x
delpart	14.38 KB	-rwxr-xr-x
delv	45.32 KB	-rwxr-xr-x
df	87.08 KB	-rwxr-xr-x
dh_bash-completion	4.42 KB	-rwxr-xr-x
dh_installxmlcatalogs	9.22 KB	-rwxr-xr-x
dh_perl_dbi	1.17 KB	-rwxr-xr-x
diff	134.55 KB	-rwxr-xr-x
diff3	58.52 KB	-rwxr-xr-x
dig	150.83 KB	-rwxr-xr-x
dir	138.98 KB	-rwxr-xr-x
dircolors	46.52 KB	-rwxr-xr-x
dirmngr	473.77 KB	-rwxr-xr-x
dirmngr-client	54.92 KB	-rwxr-xr-x
dirname	34.38 KB	-rwxr-xr-x
distro-info	26.89 KB	-rwxr-xr-x
dmesg	68.64 KB	-rwxr-xr-x
dnsdomainname	22.23 KB	-rwxr-xr-x
do-release-upgrade	10.42 KB	-rwxr-xr-x
domainname	22.23 KB	-rwxr-xr-x
dpkg	310.72 KB	-rwxr-xr-x
dpkg-deb	142.58 KB	-rwxr-xr-x
dpkg-divert	118.57 KB	-rwxr-xr-x
dpkg-maintscript-helper	20.71 KB	-rwxr-xr-x
dpkg-query	134.56 KB	-rwxr-xr-x
dpkg-realpath	4.09 KB	-rwxr-xr-x
dpkg-split	98.53 KB	-rwxr-xr-x
dpkg-statoverride	50.38 KB	-rwxr-xr-x
dpkg-trigger	42.53 KB	-rwxr-xr-x
dstat	74.98 KB	-rwxr-xr-x
du	98.51 KB	-rwxr-xr-x
dumpkeys	162.85 KB	-rwxr-xr-x
eatmydata	2.74 KB	-rwxr-xr-x
ec2metadata	8.38 KB	-rwxr-xr-x
echo	34.38 KB	-rwxr-xr-x
ed	58.55 KB	-rwxr-xr-x
editor	272.5 KB	-rwxr-xr-x
efibootdump	22.3 KB	-rwxr-xr-x
efibootmgr	47.69 KB	-rwxr-xr-x
egrep	41 B	-rwxr-xr-x
eject	42.23 KB	-rwxr-xr-x
enc2xs	40.96 KB	-rwxr-xr-x
encguess	3 KB	-rwxr-xr-x
env	46.95 KB	-rwxr-xr-x
envsubst	34.38 KB	-rwxr-xr-x
eqn	188.45 KB	-rwxr-xr-x
ex	3.94 MB	-rwxr-xr-x
expand	34.53 KB	-rwxr-xr-x
expiry	26.52 KB	-rwxr-sr-x
expr	42.41 KB	-rwxr-xr-x
factor	62.51 KB	-rwxr-xr-x
faillog	22.63 KB	-rwxr-xr-x
fallocate	26.38 KB	-rwxr-xr-x
false	26.3 KB	-rwxr-xr-x
fcgistarter	14.3 KB	-rwxr-xr-x
fgconsole	14.37 KB	-rwxr-xr-x
fgrep	41 B	-rwxr-xr-x
filan	50.48 KB	-rwxr-xr-x
file	30.6 KB	-rwxr-xr-x
finalrd	2.06 KB	-rwxr-xr-x
find	199.48 KB	-rwxr-xr-x
findmnt	67.66 KB	-rwxr-xr-x
flock	22.48 KB	-rwxr-xr-x
fmt	38.51 KB	-rwxr-xr-x
fold	34.51 KB	-rwxr-xr-x
free	26.38 KB	-rwxr-xr-x
freshclam	162.24 KB	-rwxr-xr-x
ftp	182.9 KB	-rwxr-xr-x
funzip	26.3 KB	-rwxr-xr-x
fuser	39.34 KB	-rwxr-xr-x
fusermount	38.38 KB	-rwsr-xr-x
fusermount3	38.38 KB	-rwsr-xr-x
fwupdmgr	118.3 KB	-rwxr-xr-x
fwupdtool	110.3 KB	-rwxr-xr-x
galera_new_cluster	917 B	-rwxr-xr-x
galera_recovery	3.29 KB	-rwxr-xr-x
gapplication	22.38 KB	-rwxr-xr-x
gawk	722.5 KB	-rwxr-xr-x
gawkbug	6.74 KB	-rwxr-xr-x
gdbus	50.38 KB	-rwxr-xr-x
gencat	26.44 KB	-rwxr-xr-x
genpmda	29.17 KB	-rwxr-xr-x
geqn	188.45 KB	-rwxr-xr-x
getconf	26.36 KB	-rwxr-xr-x
getent	38.72 KB	-rwxr-xr-x
getkeycodes	14.37 KB	-rwxr-xr-x
getopt	22.38 KB	-rwxr-xr-x
gettext	34.38 KB	-rwxr-xr-x
gettext.sh	5.07 KB	-rwxr-xr-x
ginstall-info	47.24 KB	-rwxr-xr-x
gio	102.4 KB	-rwxr-xr-x
gio-querymodules	18.3 KB	-rwxr-xr-x
git	3.88 MB	-rwxr-xr-x
git-receive-pack	3.88 MB	-rwxr-xr-x
git-shell	624.81 KB	-rwxr-xr-x
git-upload-archive	3.88 MB	-rwxr-xr-x
git-upload-pack	3.88 MB	-rwxr-xr-x
glib-compile-schemas	54.3 KB	-rwxr-xr-x
gpasswd	74.46 KB	-rwsr-xr-x
gpg	1.09 MB	-rwxr-xr-x
gpg-agent	357.52 KB	-rwxr-xr-x
gpg-connect-agent	87.3 KB	-rwxr-xr-x
gpg-wks-client	139.37 KB	-rwxr-xr-x
gpgconf	115.36 KB	-rwxr-xr-x
gpgparsemail	34.38 KB	-rwxr-xr-x
gpgsm	501.37 KB	-rwxr-xr-x
gpgsplit	26.62 KB	-rwxr-xr-x
gpgtar	67.83 KB	-rwxr-xr-x
gpgv	303.14 KB	-rwxr-xr-x
gpic	196.06 KB	-rwxr-xr-x
grep	182.45 KB	-rwxr-xr-x
gresource	22.3 KB	-rwxr-xr-x
groff	94.51 KB	-rwxr-xr-x
grog	18.75 KB	-rwxr-xr-x
grops	162.55 KB	-rwxr-xr-x
grotty	118.51 KB	-rwxr-xr-x
groups	34.51 KB	-rwxr-xr-x
growpart	29.19 KB	-rwxr-xr-x
grub-editenv	393.16 KB	-rwxr-xr-x
grub-file	741.88 KB	-rwxr-xr-x
grub-fstest	863.32 KB	-rwxr-xr-x
grub-glue-efi	102.88 KB	-rwxr-xr-x
grub-kbdcomp	1.64 KB	-rwxr-xr-x
grub-menulst2cfg	83.2 KB	-rwxr-xr-x
grub-mkfont	131.45 KB	-rwxr-xr-x
grub-mkimage	377.26 KB	-rwxr-xr-x
grub-mklayout	103.23 KB	-rwxr-xr-x
grub-mknetdir	429.77 KB	-rwxr-xr-x
grub-mkpasswd-pbkdf2	111.32 KB	-rwxr-xr-x
grub-mkrelpath	259.79 KB	-rwxr-xr-x
grub-mkrescue	1019.84 KB	-rwxr-xr-x
grub-mkstandalone	510.16 KB	-rwxr-xr-x
grub-mount	682.21 KB	-rwxr-xr-x
grub-ntldr-img	38.39 KB	-rwxr-xr-x
grub-render-label	750.23 KB	-rwxr-xr-x
grub-script-check	126.76 KB	-rwxr-xr-x
grub-syslinux2cfg	698.71 KB	-rwxr-xr-x
gsettings	30.3 KB	-rwxr-xr-x
gtbl	134.48 KB	-rwxr-xr-x
gunzip	2.29 KB	-rwxr-xr-x
gzexe	6.3 KB	-rwxr-xr-x
gzip	91.23 KB	-rwxr-xr-x
h2ph	28.54 KB	-rwxr-xr-x
h2xs	59.51 KB	-rwxr-xr-x
hardlink	46.48 KB	-rwxr-xr-x
hd	46.39 KB	-rwxr-xr-x
head	42.51 KB	-rwxr-xr-x
helpztags	2.46 KB	-rwxr-xr-x
hexdump	46.39 KB	-rwxr-xr-x
host	118.82 KB	-rwxr-xr-x
hostid	34.51 KB	-rwxr-xr-x
hostname	22.23 KB	-rwxr-xr-x
hostnamectl	30.45 KB	-rwxr-xr-x
htcacheclean	34.31 KB	-rwxr-xr-x
htdbm	26.3 KB	-rwxr-xr-x
htdigest	14.3 KB	-rwxr-xr-x
htop	370.33 KB	-rwxr-xr-x
htpasswd	26.3 KB	-rwxr-xr-x
hwe-support-status	11.24 KB	-rwxr-xr-x
i386	26.65 KB	-rwxr-xr-x
iconv	66.48 KB	-rwxr-xr-x
id	38.51 KB	-rwxr-xr-x
ifstat	34.31 KB	-rwxr-xr-x
inetutils-telnet	177.85 KB	-rwxr-xr-x
info	241.73 KB	-rwxr-xr-x
infobrowser	241.73 KB	-rwxr-xr-x
infocmp	66.38 KB	-rwxr-xr-x
infotocap	90.41 KB	-rwxr-xr-x
innochecksum	4.57 MB	-rwxr-xr-x
innotop	445.71 KB	-rwxr-xr-x
install	142.52 KB	-rwxr-xr-x
install-info	47.24 KB	-rwxr-xr-x
instmodsh	4.27 KB	-rwxr-xr-x
ionice	18.38 KB	-rwxr-xr-x
iostat	54.44 KB	-rwxr-xr-x
ip	754.8 KB	-rwxr-xr-x
ipcmk	22.45 KB	-rwxr-xr-x
ipcrm	18.38 KB	-rwxr-xr-x
ipcs	38.38 KB	-rwxr-xr-x
iperf3	14.15 KB	-rwxr-xr-x
iptables-xml	92.95 KB	-rwxr-xr-x
ischroot	14.48 KB	-rwxr-xr-x
iscsiadm	370.43 KB	-rwxr-xr-x
join	50.55 KB	-rwxr-xr-x
journalctl	78.91 KB	-rwxr-xr-x
jq	30.15 KB	-rwxr-xr-x
json-patch-jsondiff	1004 B	-rwxr-xr-x
json_pp	4.88 KB	-rwxr-xr-x
jsondiff	1004 B	-rwxr-xr-x
jsonpatch	3.77 KB	-rwxr-xr-x
jsonpointer	1.79 KB	-rwxr-xr-x
jsonschema	213 B	-rwxr-xr-x
kbd_mode	14.66 KB	-rwxr-xr-x
kbdinfo	18.37 KB	-rwxr-xr-x
kbxutil	62.83 KB	-rwxr-xr-x
keep-one-running	3.51 KB	-rwxr-xr-x
kernel-install	54.67 KB	-rwxr-xr-x
kill	22.38 KB	-rwxr-xr-x
killall	31.34 KB	-rwxr-xr-x
kmod	170.24 KB	-rwxr-xr-x
kmodsign	18.45 KB	-rwxr-xr-x
landscape-sysinfo	646 B	-rwxr-xr-x
last	34.38 KB	-rwxr-xr-x
lastb	34.38 KB	-rwxr-xr-x
lastlog	27.79 KB	-rwxr-xr-x
lcf	7.6 KB	-rwxr-xr-x
ld.so	231.07 KB	-rwxr-xr-x
ldd	5.26 KB	-rwxr-xr-x
less	190.38 KB	-rwxr-xr-x
lessecho	14.31 KB	-rwxr-xr-x
lessfile	8.83 KB	-rwxr-xr-x
lesskey	23.7 KB	-rwxr-xr-x
lesspipe	8.83 KB	-rwxr-xr-x
letsencrypt	958 B	-rwxr-xr-x
lexgrog	99.51 KB	-rwxr-xr-x
libnetcfg	15.41 KB	-rwxr-xr-x
link	34.51 KB	-rwxr-xr-x
linux-boot-prober	1.54 KB	-rwxr-xr-x
linux-check-removal	3.99 KB	-rwxr-xr-x
linux-update-symlinks	6.17 KB	-rwxr-xr-x
linux-version	2.63 KB	-rwxr-xr-x
linux32	26.65 KB	-rwxr-xr-x
linux64	26.65 KB	-rwxr-xr-x
ln	54.51 KB	-rwxr-xr-x
lnstat	22.66 KB	-rwxr-xr-x
loadkeys	202.9 KB	-rwxr-xr-x
loadunimap	34.46 KB	-rwxr-xr-x
locale	49.63 KB	-rwxr-xr-x
locale-check	14.15 KB	-rwxr-xr-x
localectl	26.45 KB	-rwxr-xr-x
localedef	319.09 KB	-rwxr-xr-x
logger	38.97 KB	-rwxr-xr-x
login	51.81 KB	-rwxr-xr-x
loginctl	66.58 KB	-rwxr-xr-x
logname	34.51 KB	-rwxr-xr-x
logresolve	14.31 KB	-rwxr-xr-x
look	18.38 KB	-rwxr-xr-x
lowntfs-3g	118.98 KB	-rwxr-xr-x
ls	138.98 KB	-rwxr-xr-x
lsattr	14.31 KB	-rwxr-xr-x
lsb_release	2.59 KB	-rwxr-xr-x
lsblk	146.38 KB	-rwxr-xr-x
lscpu	110.38 KB	-rwxr-xr-x
lshw	957.2 KB	-rwxr-xr-x
lsinitramfs	735 B	-rwxr-xr-x
lsipc	50.38 KB	-rwxr-xr-x
lslocks	30.77 KB	-rwxr-xr-x
lslogins	50.38 KB	-rwxr-xr-x
lsmem	38.38 KB	-rwxr-xr-x
lsmod	170.24 KB	-rwxr-xr-x
lsns	42.38 KB	-rwxr-xr-x
lsof	171.66 KB	-rwxr-xr-x
lspci	100.11 KB	-rwxr-xr-x
lspgpot	1.06 KB	-rwxr-xr-x
lspower	1.18 KB	-rwxr-xr-x
lsusb	246.52 KB	-rwxr-xr-x
lzcat	86.92 KB	-rwxr-xr-x
lzcmp	7.25 KB	-rwxr-xr-x
lzdiff	7.25 KB	-rwxr-xr-x
lzegrep	10.09 KB	-rwxr-xr-x
lzfgrep	10.09 KB	-rwxr-xr-x
lzgrep	10.09 KB	-rwxr-xr-x
lzless	1.77 KB	-rwxr-xr-x
lzma	86.92 KB	-rwxr-xr-x
lzmainfo	14.38 KB	-rwxr-xr-x
lzmore	2.14 KB	-rwxr-xr-x
mailmail3	227 B	-rwxr-xr-x
man	125.41 KB	-rwxr-xr-x
man-recode	35.4 KB	-rwxr-xr-x
mandb	143.67 KB	-rwxr-xr-x
manifest	1.9 KB	-rwxr-xr-x
manpath	26.78 KB	-rwxr-xr-x
mapscrn	30.46 KB	-rwxr-xr-x
mariadb	5.07 MB	-rwxr-xr-x
mariadb-access	109.31 KB	-rwxr-xr-x
mariadb-admin	4.85 MB	-rwxr-xr-x
mariadb-analyze	4.84 MB	-rwxr-xr-x
mariadb-binlog	5.13 MB	-rwxr-xr-x
mariadb-check	4.84 MB	-rwxr-xr-x
mariadb-conv	4.56 MB	-rwxr-xr-x
mariadb-convert-table-format	4.12 KB	-rwxr-xr-x
mariadb-dump	4.93 MB	-rwxr-xr-x
mariadb-dumpslow	8.05 KB	-rwxr-xr-x
mariadb-find-rows	3.21 KB	-rwxr-xr-x
mariadb-fix-extensions	1.22 KB	-rwxr-xr-x
mariadb-hotcopy	34.53 KB	-rwxr-xr-x
mariadb-import	4.83 MB	-rwxr-xr-x
mariadb-install-db	22.13 KB	-rwxr-xr-x
mariadb-optimize	4.84 MB	-rwxr-xr-x
mariadb-plugin	4.54 MB	-rwxr-xr-x
mariadb-repair	4.84 MB	-rwxr-xr-x
mariadb-report	49.02 KB	-rwxr-xr-x
mariadb-secure-installation	13.49 KB	-rwxr-xr-x
mariadb-service-convert	2.45 KB	-rwxr-xr-x
mariadb-setpermission	17.56 KB	-rwxr-xr-x
mariadb-show	4.83 MB	-rwxr-xr-x
mariadb-slap	4.85 MB	-rwxr-xr-x
mariadb-tzinfo-to-sql	4.53 MB	-rwxr-xr-x
mariadb-upgrade	4.97 MB	-rwxr-xr-x
mariadb-waitpid	4.53 MB	-rwxr-xr-x
mariadbcheck	4.84 MB	-rwxr-xr-x
mariadbd-multi	26.69 KB	-rwxr-xr-x
mariadbd-safe	30.42 KB	-rwxr-xr-x
mariadbd-safe-helper	4.49 MB	-rwxr-xr-x
markdown-it	220 B	-rwxr-xr-x
mawk	166.77 KB	-rwxr-xr-x
mbim-network	11.08 KB	-rwxr-xr-x
mbimcli	216.65 KB	-rwxr-xr-x
mcookie	26.45 KB	-rwxr-xr-x
md5sum	38.41 KB	-rwxr-xr-x
md5sum.textutils	38.41 KB	-rwxr-xr-x
mdig	50.4 KB	-rwxr-xr-x
memhog	14.42 KB	-rwxr-xr-x
memusage	7.32 KB	-rwxr-xr-x
memusagestat	22.44 KB	-rwxr-xr-x
mesg	14.38 KB	-rwxr-xr-x
migrate-pubring-from-classic-g...	3.02 KB	-rwxr-xr-x
migratepages	14.38 KB	-rwxr-xr-x
migspeed	14.3 KB	-rwxr-xr-x
mk_modmap	15.78 KB	-rwxr-xr-x
mkdir	74.51 KB	-rwxr-xr-x
mkfifo	42.51 KB	-rwxr-xr-x
mknod	42.51 KB	-rwxr-xr-x
mkpasswd	26.38 KB	-rwxr-xr-x
mksquashfs	286.95 KB	-rwxr-xr-x
mktemp	34.51 KB	-rwxr-xr-x
mmcli	273.94 KB	-rwxr-xr-x
mokutil	59.48 KB	-rwxr-xr-x
more	46.38 KB	-rwxr-xr-x
mount	50.38 KB	-rwsr-xr-x
mountpoint	18.38 KB	-rwxr-xr-x
mpstat	50.45 KB	-rwxr-xr-x
msql2mysql	1.41 KB	-rwxr-xr-x
mt	70.73 KB	-rwxr-xr-x
mt-gnu	70.73 KB	-rwxr-xr-x
mtr	76.25 KB	-rwxr-xr-x
mtr-packet	34.3 KB	-rwxr-xr-x
mtrace	6.37 KB	-rwxr-xr-x
mv	134.52 KB	-rwxr-xr-x
my_print_defaults	4.53 MB	-rwxr-xr-x
myisam_ftdump	4.87 MB	-rwxr-xr-x
myisamchk	4.99 MB	-rwxr-xr-x
myisamlog	4.85 MB	-rwxr-xr-x
myisampack	4.9 MB	-rwxr-xr-x
mysql	5.07 MB	-rwxr-xr-x
mysql_convert_table_format	4.12 KB	-rwxr-xr-x
mysql_find_rows	3.21 KB	-rwxr-xr-x
mysql_fix_extensions	1.22 KB	-rwxr-xr-x
mysql_install_db	22.13 KB	-rwxr-xr-x
mysql_plugin	4.54 MB	-rwxr-xr-x
mysql_secure_installation	13.49 KB	-rwxr-xr-x
mysql_setpermission	17.56 KB	-rwxr-xr-x
mysql_tzinfo_to_sql	4.53 MB	-rwxr-xr-x
mysql_upgrade	4.97 MB	-rwxr-xr-x
mysql_waitpid	4.53 MB	-rwxr-xr-x
mysqlaccess	109.31 KB	-rwxr-xr-x
mysqladmin	4.85 MB	-rwxr-xr-x
mysqlanalyze	4.84 MB	-rwxr-xr-x
mysqlbinlog	5.13 MB	-rwxr-xr-x
mysqlcheck	4.84 MB	-rwxr-xr-x
mysqld_multi	26.69 KB	-rwxr-xr-x
mysqld_safe	30.42 KB	-rwxr-xr-x
mysqld_safe_helper	4.49 MB	-rwxr-xr-x
mysqldump	4.93 MB	-rwxr-xr-x
mysqldumpslow	8.05 KB	-rwxr-xr-x
mysqlhotcopy	34.53 KB	-rwxr-xr-x
mysqlimport	4.83 MB	-rwxr-xr-x
mysqloptimize	4.84 MB	-rwxr-xr-x
mysqlrepair	4.84 MB	-rwxr-xr-x
mysqlreport	49.02 KB	-rwxr-xr-x
mysqlshow	4.83 MB	-rwxr-xr-x
mysqlslap	4.85 MB	-rwxr-xr-x
mytop	71.95 KB	-rwxr-xr-x
namei	22.38 KB	-rwxr-xr-x
nano	272.5 KB	-rwxr-xr-x
nawk	722.5 KB	-rwxr-xr-x
nc	38.63 KB	-rwxr-xr-x
nc.openbsd	38.63 KB	-rwxr-xr-x
neqn	913 B	-rwxr-xr-x
netaddr	959 B	-rwxr-xr-x
netcat	38.63 KB	-rwxr-xr-x
netstat	154.59 KB	-rwxr-xr-x
networkctl	122.58 KB	-rwxr-xr-x
networkd-dispatcher	19.88 KB	-rwxr-xr-x
newgrp	39.71 KB	-rwsr-xr-x
ngettext	34.38 KB	-rwxr-xr-x
nice	34.51 KB	-rwxr-xr-x
nisdomainname	22.23 KB	-rwxr-xr-x
nl	38.6 KB	-rwxr-xr-x
nohup	34.41 KB	-rwxr-xr-x
nproc	34.51 KB	-rwxr-xr-x
nroff	5.58 KB	-rwxr-xr-x
nsenter	30.6 KB	-rwxr-xr-x
nslookup	122.82 KB	-rwxr-xr-x
nstat	30.38 KB	-rwxr-xr-x
nsupdate	74.55 KB	-rwxr-xr-x
ntfs-3g	159.01 KB	-rwxr-xr-x
ntfs-3g.probe	14.38 KB	-rwxr-xr-x
ntfscat	26.38 KB	-rwxr-xr-x
ntfscluster	38.38 KB	-rwxr-xr-x
ntfscmp	30.38 KB	-rwxr-xr-x
ntfsdecrypt	42.38 KB	-rwxr-xr-x
ntfsfallocate	26.38 KB	-rwxr-xr-x
ntfsfix	34.38 KB	-rwxr-xr-x
ntfsinfo	54.38 KB	-rwxr-xr-x
ntfsls	27.45 KB	-rwxr-xr-x
ntfsmove	30.38 KB	-rwxr-xr-x
ntfsrecover	102.38 KB	-rwxr-xr-x
ntfssecaudit	78.86 KB	-rwxr-xr-x
ntfstruncate	26.3 KB	-rwxr-xr-x
ntfsusermap	18.3 KB	-rwxr-xr-x
ntfswipe	46.91 KB	-rwxr-xr-x
numactl	35.23 KB	-rwxr-xr-x
numastat	35.56 KB	-rwxr-xr-x
numfmt	58.54 KB	-rwxr-xr-x
od	70.51 KB	-rwxr-xr-x
oem-getlogs	8.3 KB	-rwxr-xr-x
on_ac_power	3.7 KB	-rwxr-xr-x
openssl	981.8 KB	-rwxr-xr-x
openvt	22.73 KB	-rwxr-xr-x
os-prober	4.42 KB	-rwxr-xr-x
pager	190.38 KB	-rwxr-xr-x
partx	62.38 KB	-rwxr-xr-x
passwd	62.65 KB	-rwsr-xr-x
paste	38.41 KB	-rwxr-xr-x
pastebinit	16.31 KB	-rwxr-xr-x
patch	182.52 KB	-rwxr-xr-x
pathchk	34.51 KB	-rwxr-xr-x
pbget	2.51 KB	-rwxr-xr-x
pbput	2.51 KB	-rwxr-xr-x
pbputs	2.51 KB	-rwxr-xr-x
pcp	5.3 KB	-rwxr-xr-x
pcp2csv	65.89 KB	-rwxr-xr-x
pdb3	67.83 KB	-rwxr-xr-x
pdb3.12	67.83 KB	-rwxr-xr-x
peekfd	14.3 KB	-rwxr-xr-x
perf	1.58 KB	-rwxr-xr-x
perl	3.83 MB	-rwxr-xr-x
perl5.38-x86_64-linux-gnu	14.3 KB	-rwxr-xr-x
perl5.38.2	3.83 MB	-rwxr-xr-x
perlbug	44.52 KB	-rwxr-xr-x
perldoc	125 B	-rwxr-xr-x
perlivp	10.61 KB	-rwxr-xr-x
perlthanks	44.52 KB	-rwxr-xr-x
perror	4.72 MB	-rwxr-xr-x
pgrep	34.47 KB	-rwxr-xr-x
phar	14.84 KB	-rwxr-xr-x
phar.default	14.84 KB	-rwxr-xr-x
phar.phar	14.84 KB	-rwxr-xr-x
phar.phar.default	14.84 KB	-rwxr-xr-x
phar.phar8.3	14.84 KB	-rwxr-xr-x
phar8.3	14.84 KB	-rwxr-xr-x
phar8.3.phar	14.84 KB	-rwxr-xr-x
php	5.52 MB	-rwxr-xr-x
php.default	5.52 MB	-rwxr-xr-x
php8.3	5.52 MB	-rwxr-xr-x
pic	196.06 KB	-rwxr-xr-x
pico	272.5 KB	-rwxr-xr-x
piconv	8.16 KB	-rwxr-xr-x
pidof	26.23 KB	-rwxr-xr-x
pidstat	50.45 KB	-rwxr-xr-x
pidwait	34.47 KB	-rwxr-xr-x
pinentry	58.65 KB	-rwxr-xr-x
pinentry-curses	58.65 KB	-rwxr-xr-x
ping	87.7 KB	-rwxr-xr-x
ping4	87.7 KB	-rwxr-xr-x
ping6	87.7 KB	-rwxr-xr-x
pinky	38.41 KB	-rwxr-xr-x
pkaction	18.3 KB	-rwxr-xr-x
pkcheck	22.3 KB	-rwxr-xr-x
pkcon	54.3 KB	-rwxr-xr-x
pkill	34.47 KB	-rwxr-xr-x
pkmon	22.3 KB	-rwxr-xr-x
pkttyagent	22.3 KB	-rwxr-xr-x
pl2pm	4.43 KB	-rwxr-xr-x
pldd	22.44 KB	-rwxr-xr-x
plymouth	46.3 KB	-rwxr-xr-x
pmafm	11.84 KB	-rwxr-xr-x
pmap	34.4 KB	-rwxr-xr-x
pmclient	22.92 KB	-rwxr-xr-x
pmclient_fg	18.91 KB	-rwxr-xr-x
pmdate	14.02 KB	-rwxr-xr-x
pmdbg	22.58 KB	-rwxr-xr-x
pmdiff	7.63 KB	-rwxr-xr-x
pmdumplog	35.13 KB	-rwxr-xr-x
pmerr	14.02 KB	-rwxr-xr-x
pmevent	43.38 KB	-rwxr-xr-x
pmfind	22.7 KB	-rwxr-xr-x
pmgenmap	2.38 KB	-rwxr-xr-x
pmie	197.95 KB	-rwxr-xr-x
pmie2col	2.81 KB	-rwxr-xr-x
pmieconf	56.77 KB	-rwxr-xr-x
pmiectl	46 KB	-rwxr-xr-x
pminfo	47.29 KB	-rwxr-xr-x
pmiostat	20.79 KB	-rwxr-xr-x
pmjson	14.63 KB	-rwxr-xr-x
pmlc	55.86 KB	-rwxr-xr-x
pmlogcheck	38.7 KB	-rwxr-xr-x
pmlogconf	55.26 KB	-rwxr-xr-x
pmlogctl	46 KB	-rwxr-xr-x
pmlogdump	35.13 KB	-rwxr-xr-x
pmlogextract	74.88 KB	-rwxr-xr-x
pmlogger	159.62 KB	-rwxr-xr-x
pmloglabel	22.63 KB	-rwxr-xr-x
pmlogmv	18.54 KB	-rwxr-xr-x
pmlogpaste	18.57 KB	-rwxr-xr-x
pmlogredact	1.79 KB	-rwxr-xr-x
pmlogreduce	30.7 KB	-rwxr-xr-x
pmlogrewrite	158.76 KB	-rwxr-xr-x
pmlogsize	26.54 KB	-rwxr-xr-x
pmlogsummary	35.13 KB	-rwxr-xr-x
pmprobe	23.04 KB	-rwxr-xr-x
pmpython	14.02 KB	-rwxr-xr-x
pmrep	65.89 KB	-rwxr-xr-x
pmrepconf	55.26 KB	-rwxr-xr-x
pmsearch	22.91 KB	-rwxr-xr-x
pmseries	39.16 KB	-rwxr-xr-x
pmsocks	1010 B	-rwxr-xr-x
pmstat	27.07 KB	-rwxr-xr-x
pmstore	18.7 KB	-rwxr-xr-x
pmtrace	14.02 KB	-rwxr-xr-x
pmval	43.38 KB	-rwxr-xr-x
pod2html	3.95 KB	-rwxr-xr-x
pod2man	18.46 KB	-rwxr-xr-x
pod2text	12.8 KB	-rwxr-xr-x
pod2usage	4.01 KB	-rwxr-xr-x
podchecker	3.57 KB	-rwxr-xr-x
pollinate	8.54 KB	-rwxr-xr-x
pr	70.58 KB	-rwxr-xr-x
preconv	58.48 KB	-rwxr-xr-x
printenv	34.38 KB	-rwxr-xr-x
printf	54.44 KB	-rwxr-xr-x
prlimit	26.89 KB	-rwxr-xr-x
pro	1003 B	-rwxr-xr-x
procan	42.41 KB	-rwxr-xr-x
prove	13.34 KB	-rwxr-xr-x
prtstat	18.38 KB	-rwxr-xr-x
ps	142.99 KB	-rwxr-xr-x
psfaddtable	22.37 KB	-rwxr-xr-x
psfgettable	22.37 KB	-rwxr-xr-x
psfstriptable	22.37 KB	-rwxr-xr-x
psfxtable	22.37 KB	-rwxr-xr-x
pslog	14.3 KB	-rwxr-xr-x
pstree	35.32 KB	-rwxr-xr-x
pstree.x11	35.32 KB	-rwxr-xr-x
ptar	3.48 KB	-rwxr-xr-x
ptardiff	2.58 KB	-rwxr-xr-x
ptargrep	4.29 KB	-rwxr-xr-x
ptx	54.54 KB	-rwxr-xr-x
purge-old-kernels	1.12 KB	-rwxr-xr-x
pv	79.41 KB	-rwxr-xr-x
pwd	34.51 KB	-rwxr-xr-x
pwdx	14.38 KB	-rwxr-xr-x
py3clean	7.63 KB	-rwxr-xr-x
py3compile	13 KB	-rwxr-xr-x
py3versions	12.52 KB	-rwxr-xr-x
pybabel	956 B	-rwxr-xr-x
pybabel-python3	956 B	-rwxr-xr-x
pydoc3	80 B	-rwxr-xr-x
pydoc3.12	80 B	-rwxr-xr-x
pygettext3	23.66 KB	-rwxr-xr-x
pygettext3.12	23.66 KB	-rwxr-xr-x
pygmentize	215 B	-rwxr-xr-x
pyhtmlizer3	222 B	-rwxr-xr-x
pyserial-miniterm	975 B	-rwxr-xr-x
pyserial-ports	969 B	-rwxr-xr-x
python3	7.65 MB	-rwxr-xr-x
python3.12	7.65 MB	-rwxr-xr-x
pzstd	690.54 KB	-rwxr-xr-x
qmi-firmware-update	168.09 KB	-rwxr-xr-x
qmi-network	16.04 KB	-rwxr-xr-x
qmicli	586.84 KB	-rwxr-xr-x
rbash	1.38 MB	-rwxr-xr-x
rdma	102.52 KB	-rwxr-xr-x
readlink	42.41 KB	-rwxr-xr-x
realpath	42.41 KB	-rwxr-xr-x
red	89 B	-rwxr-xr-x
rename.ul	22.38 KB	-rwxr-xr-x
renice	14.38 KB	-rwxr-xr-x
replace	4.51 MB	-rwxr-xr-x
rescan-scsi-bus.sh	38.05 KB	-rwxr-xr-x
reset	26.31 KB	-rwxr-xr-x
resizecons	26.46 KB	-rwxr-xr-x
resizepart	22.38 KB	-rwxr-xr-x
resolve_stack_dump	4.53 MB	-rwxr-xr-x
resolvectl	158.67 KB	-rwxr-xr-x
resolveip	4.53 MB	-rwxr-xr-x
rev	14.38 KB	-rwxr-xr-x
rgrep	30 B	-rwxr-xr-x
rm	58.51 KB	-rwxr-xr-x
rmdir	46.41 KB	-rwxr-xr-x
rnano	272.5 KB	-rwxr-xr-x
rotatelogs	26.38 KB	-rwxr-xr-x
routel	1.62 KB	-rwxr-xr-x
rpcgen	94.59 KB	-rwxr-xr-x
rrsync	12.34 KB	-rwxr-xr-x
rsync	502.13 KB	-rwxr-xr-x
rsync-ssl	5.02 KB	-rwxr-xr-x
rtla	1.58 KB	-rwxr-xr-x
rtstat	22.66 KB	-rwxr-xr-x
run-one	3.51 KB	-rwxr-xr-x
run-one-constantly	3.51 KB	-rwxr-xr-x
run-one-until-failure	3.51 KB	-rwxr-xr-x
run-one-until-success	3.51 KB	-rwxr-xr-x
run-parts	26.82 KB	-rwxr-xr-x
run-this-one	3.51 KB	-rwxr-xr-x
runcon	34.51 KB	-rwxr-xr-x
rview	3.94 MB	-rwxr-xr-x
rvim	3.94 MB	-rwxr-xr-x
sadf	382.31 KB	-rwxr-xr-x
sar	137.38 KB	-rwxr-xr-x
sar.sysstat	137.38 KB	-rwxr-xr-x
savelog	10.24 KB	-rwxr-xr-x
sbattach	22.54 KB	-rwxr-xr-x
sbkeysync	34.74 KB	-rwxr-xr-x
sbsiglist	14.6 KB	-rwxr-xr-x
sbsign	34.7 KB	-rwxr-xr-x
sbvarsign	22.73 KB	-rwxr-xr-x
sbverify	30.61 KB	-rwxr-xr-x
scalar	668.94 KB	-rwxr-xr-x
scandeps	6.47 KB	-rwxr-xr-x
scp	134.59 KB	-rwxr-xr-x
screen	478.24 KB	-rwxr-xr-x
screendump	14.3 KB	-rwxr-xr-x
script	54.38 KB	-rwxr-xr-x
scriptlive	42.38 KB	-rwxr-xr-x
scriptreplay	34.38 KB	-rwxr-xr-x
scsi_logging_level	8.38 KB	-rwxr-xr-x
scsi_mandat	3.52 KB	-rwxr-xr-x
scsi_readcap	1.3 KB	-rwxr-xr-x
scsi_ready	1.09 KB	-rwxr-xr-x
scsi_satl	3.74 KB	-rwxr-xr-x
scsi_start	1.25 KB	-rwxr-xr-x
scsi_stop	1.44 KB	-rwxr-xr-x
scsi_temperature	936 B	-rwxr-xr-x
sdiff	50.39 KB	-rwxr-xr-x
sed	110.57 KB	-rwxr-xr-x
select-editor	2.39 KB	-rwxr-xr-x
sensible-browser	1.55 KB	-rwxr-xr-x
sensible-editor	1.52 KB	-rwxr-xr-x
sensible-pager	921 B	-rwxr-xr-x
sensible-terminal	1.15 KB	-rwxr-xr-x
seq	50.51 KB	-rwxr-xr-x
setarch	26.65 KB	-rwxr-xr-x
setfont	54.46 KB	-rwxr-xr-x
setkeycodes	14.37 KB	-rwxr-xr-x
setleds	18.43 KB	-rwxr-xr-x
setlogcons	14.37 KB	-rwxr-xr-x
setmetamode	14.41 KB	-rwxr-xr-x
setpci	30.38 KB	-rwxr-xr-x
setpriv	38.38 KB	-rwxr-xr-x
setsid	14.38 KB	-rwxr-xr-x
setterm	34.38 KB	-rwxr-xr-x
setupcon	40.06 KB	-rwxr-xr-x
sftp	150.66 KB	-rwxr-xr-x
sg	39.71 KB	-rwsr-xr-x
sg_bg_ctl	14.51 KB	-rwxr-xr-x
sg_compare_and_write	26.91 KB	-rwxr-xr-x
sg_copy_results	23.3 KB	-rwxr-xr-x
sg_dd	54.33 KB	-rwxr-xr-x
sg_decode_sense	14.76 KB	-rwxr-xr-x
sg_emc_trespass	14.3 KB	-rwxr-xr-x
sg_format	39.35 KB	-rwxr-xr-x
sg_get_config	35.38 KB	-rwxr-xr-x
sg_get_elem_status	26.79 KB	-rwxr-xr-x
sg_get_lba_status	22.95 KB	-rwxr-xr-x
sg_ident	14.6 KB	-rwxr-xr-x
sg_inq	115.61 KB	-rwxr-xr-x
sg_logs	146.93 KB	-rwxr-xr-x
sg_luns	22.79 KB	-rwxr-xr-x
sg_map	18.3 KB	-rwxr-xr-x
sg_map26	26.7 KB	-rwxr-xr-x
sg_modes	46.08 KB	-rwxr-xr-x
sg_opcodes	35.01 KB	-rwxr-xr-x
sg_persist	36.08 KB	-rwxr-xr-x
sg_prevent	14.51 KB	-rwxr-xr-x
sg_raw	26.91 KB	-rwxr-xr-x
sg_rbuf	22.73 KB	-rwxr-xr-x
sg_rdac	18.3 KB	-rwxr-xr-x
sg_read	26.31 KB	-rwxr-xr-x
sg_read_attr	36.65 KB	-rwxr-xr-x
sg_read_block_limits	14.54 KB	-rwxr-xr-x
sg_read_buffer	27.56 KB	-rwxr-xr-x
sg_read_long	14.7 KB	-rwxr-xr-x
sg_readcap	22.79 KB	-rwxr-xr-x
sg_reassign	18.66 KB	-rwxr-xr-x
sg_referrals	14.66 KB	-rwxr-xr-x
sg_rep_pip	14.57 KB	-rwxr-xr-x
sg_rep_zones	26.8 KB	-rwxr-xr-x
sg_requests	22.76 KB	-rwxr-xr-x
sg_reset	14.66 KB	-rwxr-xr-x
sg_reset_wp	14.6 KB	-rwxr-xr-x
sg_rmsn	14.51 KB	-rwxr-xr-x
sg_rtpg	14.6 KB	-rwxr-xr-x
sg_safte	22.7 KB	-rwxr-xr-x
sg_sanitize	27.01 KB	-rwxr-xr-x
sg_sat_identify	18.73 KB	-rwxr-xr-x
sg_sat_phy_event	19.01 KB	-rwxr-xr-x
sg_sat_read_gplog	18.73 KB	-rwxr-xr-x
sg_sat_set_features	18.7 KB	-rwxr-xr-x
sg_scan	18.38 KB	-rwxr-xr-x
sg_seek	18.88 KB	-rwxr-xr-x
sg_senddiag	27.2 KB	-rwxr-xr-x
sg_ses	119.97 KB	-rwxr-xr-x
sg_ses_microcode	27.36 KB	-rwxr-xr-x
sg_start	18.85 KB	-rwxr-xr-x
sg_stpg	22.73 KB	-rwxr-xr-x
sg_stream_ctl	18.7 KB	-rwxr-xr-x
sg_sync	14.66 KB	-rwxr-xr-x
sg_test_rwbuf	18.6 KB	-rwxr-xr-x
sg_timestamp	22.83 KB	-rwxr-xr-x
sg_turs	26.7 KB	-rwxr-xr-x
sg_unmap	22.76 KB	-rwxr-xr-x
sg_verify	22.91 KB	-rwxr-xr-x
sg_vpd	118.42 KB	-rwxr-xr-x
sg_wr_mode	22.73 KB	-rwxr-xr-x
sg_write_buffer	27.23 KB	-rwxr-xr-x
sg_write_long	14.76 KB	-rwxr-xr-x
sg_write_same	26.95 KB	-rwxr-xr-x
sg_write_verify	26.79 KB	-rwxr-xr-x
sg_write_x	55.6 KB	-rwxr-xr-x
sg_xcopy	42.32 KB	-rwxr-xr-x
sg_zone	14.86 KB	-rwxr-xr-x
sginfo	76.01 KB	-rwxr-xr-x
sgm_dd	34.31 KB	-rwxr-xr-x
sgp_dd	46.31 KB	-rwxr-xr-x
sh	126.74 KB	-rwxr-xr-x
sha1sum	38.41 KB	-rwxr-xr-x
sha224sum	38.41 KB	-rwxr-xr-x
sha256sum	38.41 KB	-rwxr-xr-x
sha384sum	38.41 KB	-rwxr-xr-x
sha512sum	38.41 KB	-rwxr-xr-x
shasum	9.75 KB	-rwxr-xr-x
showconsolefont	18.37 KB	-rwxr-xr-x
showkey	18.37 KB	-rwxr-xr-x
shred	54.51 KB	-rwxr-xr-x
shuf	46.51 KB	-rwxr-xr-x
sigtool	6.74 MB	-rwxr-xr-x
skill	26.41 KB	-rwxr-xr-x
slabtop	22.44 KB	-rwxr-xr-x
sleep	34.51 KB	-rwxr-xr-x
slogin	827.04 KB	-rwxr-xr-x
snap	20.64 MB	-rwxr-xr-x
snapctl	7.29 MB	-rwxr-xr-x
snapfuse	38.23 KB	-rwxr-xr-x
snice	26.41 KB	-rwxr-xr-x
socat	447.68 KB	-rwxr-xr-x
socat-broker.sh	2.24 KB	-rwxr-xr-x
socat-chain.sh	7.86 KB	-rwxr-xr-x
socat-mux.sh	3.47 KB	-rwxr-xr-x
socat1	447.68 KB	-rwxr-xr-x
soelim	34.48 KB	-rwxr-xr-x
sort	102.8 KB	-rwxr-xr-x
sos	612 B	-rwxr-xr-x
sos-collector	1.04 KB	-rwxr-xr-x
sosreport	1.03 KB	-rwxr-xr-x
sotruss	4.21 KB	-rwxr-xr-x
speedtest	980 B	-rwxr-xr-x
speedtest-cli	988 B	-rwxr-xr-x
splain	18.99 KB	-rwxr-xr-x
split	54.94 KB	-rwxr-xr-x
splitfont	14.3 KB	-rwxr-xr-x
sprof	34.44 KB	-rwxr-xr-x
sqfscat	147.9 KB	-rwxr-xr-x
sqfstar	286.95 KB	-rwxr-xr-x
ss	129.07 KB	-rwxr-xr-x
ssh	827.04 KB	-rwxr-xr-x
ssh-add	294.42 KB	-rwxr-xr-x
ssh-agent	302.43 KB	-rwxr-sr-x
ssh-argv0	1.42 KB	-rwxr-xr-x
ssh-copy-id	12.77 KB	-rwxr-xr-x
ssh-import-id	985 B	-rwxr-xr-x
ssh-import-id-gh	785 B	-rwxr-xr-x
ssh-import-id-lp	785 B	-rwxr-xr-x
ssh-keygen	442.44 KB	-rwxr-xr-x
ssh-keyscan	330.44 KB	-rwxr-xr-x
stat	86.52 KB	-rwxr-xr-x
static-sh	2.03 MB	-rwxr-xr-x
stdbuf	50.51 KB	-rwxr-xr-x
strace	1.99 MB	-rwxr-xr-x
strace-log-merge	1.78 KB	-rwxr-xr-x
streamzip	7.87 KB	-rwxr-xr-x
stty	78.52 KB	-rwxr-xr-x
su	54.38 KB	-rwsr-xr-x
sudo	271.42 KB	-rwsr-xr-x
sudoedit	271.42 KB	-rwsr-xr-x
sudoreplay	95.95 KB	-rwxr-xr-x
sum	34.41 KB	-rwxr-xr-x
sync	34.41 KB	-rwxr-xr-x
systemctl	1.43 MB	-rwxr-xr-x
systemd	98.45 KB	-rwxr-xr-x
systemd-ac-power	14.45 KB	-rwxr-xr-x
systemd-analyze	198.85 KB	-rwxr-xr-x
systemd-ask-password	18.58 KB	-rwxr-xr-x
systemd-cat	18.45 KB	-rwxr-xr-x
systemd-cgls	22.57 KB	-rwxr-xr-x
systemd-cgtop	38.47 KB	-rwxr-xr-x
systemd-confext	54.64 KB	-rwxr-xr-x
systemd-creds	42.72 KB	-rwxr-xr-x
systemd-cryptenroll	70.92 KB	-rwxr-xr-x
systemd-cryptsetup	78.95 KB	-rwxr-xr-x
systemd-delta	26.45 KB	-rwxr-xr-x
systemd-detect-virt	18.45 KB	-rwxr-xr-x
systemd-escape	22.45 KB	-rwxr-xr-x
systemd-firstboot	58.82 KB	-rwxr-xr-x
systemd-hwdb	154.74 KB	-rwxr-xr-x
systemd-id128	22.45 KB	-rwxr-xr-x
systemd-inhibit	22.47 KB	-rwxr-xr-x
systemd-machine-id-setup	18.63 KB	-rwxr-xr-x
systemd-mount	50.78 KB	-rwxr-xr-x
systemd-notify	26.66 KB	-rwxr-xr-x
systemd-path	18.45 KB	-rwxr-xr-x
systemd-repart	195.23 KB	-rwxr-xr-x
systemd-run	66.79 KB	-rwxr-xr-x
systemd-socket-activate	30.45 KB	-rwxr-xr-x
systemd-stdio-bridge	22.45 KB	-rwxr-xr-x
systemd-sysext	54.64 KB	-rwxr-xr-x
systemd-sysusers	66.63 KB	-rwxr-xr-x
systemd-tmpfiles	114.7 KB	-rwxr-xr-x
systemd-tty-ask-password-agent	34.45 KB	-rwxr-xr-x
systemd-umount	50.78 KB	-rwxr-xr-x
tabs	18.3 KB	-rwxr-xr-x
tac	38.41 KB	-rwxr-xr-x
tail	62.53 KB	-rwxr-xr-x
tapestat	26.44 KB	-rwxr-xr-x
tar	421.92 KB	-rwxr-xr-x
taskset	30.38 KB	-rwxr-xr-x
tbl	134.48 KB	-rwxr-xr-x
tclsh	14.15 KB	-rwxr-xr-x
tclsh8.6	14.15 KB	-rwxr-xr-x
tcpdump	1.21 MB	-rwxr-xr-x
tee	38.51 KB	-rwxr-xr-x
telnet	177.85 KB	-rwxr-xr-x
tempfile	14.3 KB	-rwxr-xr-x
test	46.44 KB	-rwxr-xr-x
tic	90.41 KB	-rwxr-xr-x
time	26.52 KB	-rwxr-xr-x
timedatectl	46.45 KB	-rwxr-xr-x
timeout	38.95 KB	-rwxr-xr-x
tkconch3	227 B	-rwxr-xr-x
tload	22.39 KB	-rwxr-xr-x
tmux	1.05 MB	-rwxr-xr-x
tnftp	182.9 KB	-rwxr-xr-x
toe	22.3 KB	-rwxr-xr-x
top	131.7 KB	-rwxr-xr-x
touch	94.51 KB	-rwxr-xr-x
tput	26.34 KB	-rwxr-xr-x
tr	46.51 KB	-rwxr-xr-x
trace-cmd	435.41 KB	-rwxr-xr-x
tracepath	18.15 KB	-rwxr-xr-x
trial3	219 B	-rwxr-xr-x
troff	726.62 KB	-rwxr-xr-x
true	26.3 KB	-rwxr-xr-x
truncate	38.51 KB	-rwxr-xr-x
tset	26.31 KB	-rwxr-xr-x
tsort	46.51 KB	-rwxr-xr-x
tty	34.51 KB	-rwxr-xr-x
turbostat	1.58 KB	-rwxr-xr-x
twist3	239 B	-rwxr-xr-x
twistd3	220 B	-rwxr-xr-x
tzselect	15.02 KB	-rwxr-xr-x
ua	1003 B	-rwxr-xr-x
ubuntu-advantage	1003 B	-rwxr-xr-x
ubuntu-bug	2.27 KB	-rwxr-xr-x
ubuntu-distro-info	26.89 KB	-rwxr-xr-x
ubuntu-security-status	22.25 KB	-rwxr-xr-x
ucf	40.68 KB	-rwxr-xr-x
ucfq	18.91 KB	-rwxr-xr-x
ucfr	10.85 KB	-rwxr-xr-x
uclampset	30.38 KB	-rwxr-xr-x
udevadm	1.37 MB	-rwxr-xr-x
udisksctl	62.38 KB	-rwxr-xr-x
ul	22.38 KB	-rwxr-xr-x
umount	38.38 KB	-rwsr-xr-x
uname	34.51 KB	-rwxr-xr-x
unattended-upgrade	97.21 KB	-rwxr-xr-x
unattended-upgrades	97.21 KB	-rwxr-xr-x
uncompress	2.29 KB	-rwxr-xr-x
unexpand	38.53 KB	-rwxr-xr-x
unicode_start	2.71 KB	-rwxr-xr-x
unicode_stop	528 B	-rwxr-xr-x
uniq	38.51 KB	-rwxr-xr-x
unlink	34.51 KB	-rwxr-xr-x
unlzma	86.92 KB	-rwxr-xr-x
unmkinitramfs	3.7 KB	-rwxr-xr-x
unshare	42.6 KB	-rwxr-xr-x
unsquashfs	147.9 KB	-rwxr-xr-x
unxz	86.92 KB	-rwxr-xr-x
unzip	174.42 KB	-rwxr-xr-x
unzipsfx	74.42 KB	-rwxr-xr-x
unzstd	998.79 KB	-rwxr-xr-x
update-alternatives	58.38 KB	-rwxr-xr-x
update-mime-database	74.33 KB	-rwxr-xr-x
uptime	14.38 KB	-rwxr-xr-x
usb-devices	4.83 KB	-rwxr-xr-x
usbhid-dump	30.38 KB	-rwxr-xr-x
usbip	1.58 KB	-rwxr-xr-x
usbipd	1.58 KB	-rwxr-xr-x
usbreset	14.3 KB	-rwxr-xr-x
users	34.51 KB	-rwxr-xr-x
utmpdump	22.38 KB	-rwxr-xr-x
uuidgen	18.38 KB	-rwxr-xr-x
uuidparse	22.38 KB	-rwxr-xr-x
varlinkctl	30.45 KB	-rwxr-xr-x
vcs-run	6.75 KB	-rwxr-xr-x
vdir	138.98 KB	-rwxr-xr-x
vi	3.94 MB	-rwxr-xr-x
view	3.94 MB	-rwxr-xr-x
vigpg	2.58 KB	-rwxr-xr-x
vim	3.94 MB	-rwxr-xr-x
vim.basic	3.94 MB	-rwxr-xr-x
vim.tiny	1.66 MB	-rwxr-xr-x
vimdiff	3.94 MB	-rwxr-xr-x
vimtutor	2.1 KB	-rwxr-xr-x
vm-support	9.83 KB	-rwxr-xr-x
vmhgfs-fuse	46.73 KB	-rwxr-xr-x
vmstat	38.78 KB	-rwxr-xr-x
vmtoolsd	74.56 KB	-rwxr-xr-x
vmware-alias-import	42.52 KB	-rwxr-xr-x
vmware-checkvm	14.38 KB	-rwxr-xr-x
vmware-hgfsclient	14.38 KB	-rwxr-xr-x
vmware-namespace-cmd	22.3 KB	-rwxr-xr-x
vmware-rpctool	18.3 KB	-rwxr-xr-x
vmware-toolbox-cmd	54.59 KB	-rwxr-xr-x
vmware-vgauth-cmd	18.3 KB	-rwxr-xr-x
vmware-vmblock-fuse	22.78 KB	-rwxr-xr-x
vmware-xferlogs	32.33 KB	-rwxr-xr-x
vnstat	149.36 KB	-rwxr-xr-x
vsftpdwho	54 B	-rwxr-xr-x
w	26.38 KB	-rwxr-xr-x
w3m	1.58 MB	-rwxr-xr-x
w3mman	1.37 KB	-rwxr-xr-x
wall	22.38 KB	-rwxr-xr-x
watch	30.84 KB	-rwxr-xr-x
watchgnupg	22.3 KB	-rwxr-xr-x
wc	54.52 KB	-rwxr-xr-x
wdctl	34.4 KB	-rwxr-xr-x
wget	459.02 KB	-rwxr-xr-x
whatis	47.28 KB	-rwxr-xr-x
whereis	30.84 KB	-rwxr-xr-x
which	1.05 KB	-rwxr-xr-x
which.debianutils	1.05 KB	-rwxr-xr-x
whiptail	30.16 KB	-rwxr-xr-x
who	58.52 KB	-rwxr-xr-x
whoami	34.51 KB	-rwxr-xr-x
whois	155.66 KB	-rwxr-xr-x
wifi-status	2.06 KB	-rwxr-xr-x
write	22.38 KB	-rwxr-xr-x
wrk	78.87 KB	-rwxr-xr-x
wsrep_sst_backup	2.39 KB	-rwxr-xr-x
wsrep_sst_common	66.86 KB	-rwxr-xr-x
wsrep_sst_mariabackup	49.23 KB	-rwxr-xr-x
wsrep_sst_mysqldump	8.11 KB	-rwxr-xr-x
wsrep_sst_rsync	29.72 KB	-rwxr-xr-x
wsrep_sst_rsync_wan	29.72 KB	-rwxr-xr-x
www-browser	1.58 MB	-rwxr-xr-x
x86_64	26.65 KB	-rwxr-xr-x
x86_energy_perf_policy	1.58 KB	-rwxr-xr-x
xargs	62.41 KB	-rwxr-xr-x
xauth	54.96 KB	-rwxr-xr-x
xdg-user-dir	234 B	-rwxr-xr-x
xdg-user-dirs-update	26.23 KB	-rwxr-xr-x
xsubpp	5.05 KB	-rwxr-xr-x
xxd	22.28 KB	-rwxr-xr-x
xz	86.92 KB	-rwxr-xr-x
xzcat	86.92 KB	-rwxr-xr-x
xzcmp	7.25 KB	-rwxr-xr-x
xzdiff	7.25 KB	-rwxr-xr-x
xzegrep	10.09 KB	-rwxr-xr-x
xzfgrep	10.09 KB	-rwxr-xr-x
xzgrep	10.09 KB	-rwxr-xr-x
xzless	1.77 KB	-rwxr-xr-x
xzmore	2.14 KB	-rwxr-xr-x
yes	34.38 KB	-rwxr-xr-x
ypdomainname	22.23 KB	-rwxr-xr-x
zcat	1.94 KB	-rwxr-xr-x
zcmp	1.64 KB	-rwxr-xr-x
zdiff	6.31 KB	-rwxr-xr-x
zdump	30.28 KB	-rwxr-xr-x
zegrep	29 B	-rwxr-xr-x
zfgrep	29 B	-rwxr-xr-x
zforce	2.03 KB	-rwxr-xr-x
zgrep	7.91 KB	-rwxr-xr-x
zip	206.98 KB	-rwxr-xr-x
zipcloak	70.4 KB	-rwxr-xr-x
zipdetails	68.55 KB	-rwxr-xr-x
zipgrep	2.89 KB	-rwxr-xr-x
zipinfo	174.42 KB	-rwxr-xr-x
zipnote	62.4 KB	-rwxr-xr-x
zipsplit	58.4 KB	-rwxr-xr-x
zless	2.15 KB	-rwxr-xr-x
zmore	1.8 KB	-rwxr-xr-x
znew	4.47 KB	-rwxr-xr-x
zstd	998.79 KB	-rwxr-xr-x
zstdcat	998.79 KB	-rwxr-xr-x
zstdgrep	3.78 KB	-rwxr-xr-x
zstdless	197 B	-rwxr-xr-x
zstdmt	998.79 KB	-rwxr-xr-x

Code Editor : pmiectl

#!/bin/sh
#
# Control program for managing pmlogger and pmie instances.
#
# Copyright (c) 2020 Ken McDonell.  All Rights Reserved.
# Copyright (c) 2021 Red Hat.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# TODO
# - more than 1 -c option ... what does it mean?  the current code simply
#   and silently uses the last -c option from the command line (this
#   warrants at least a warning) ... if supported the likely semantics
#   are the union of the named classes ... unless this is allowed, a regex
#   pattern for the -c arg (classname) makes no sense
# - regex expansion for <class>
# - other sections in the "policy" files, especially with pmfind to
#   (a) at destroy, decide not to or wait some time before destroying
#       (the latter is really hard)
#

. "$PCP_DIR/etc/pcp.env"
. "$PCP_SHARE_DIR/lib/rc-proc.sh"
. "$PCP_SHARE_DIR/lib/utilproc.sh"

prog=`basename "$0"`
case "$prog"
in
    pmlogctl*)	IAM=pmlogger
		CONTROLFILE=$PCP_PMLOGGERCONTROL_PATH
    		;;
    pmiectl*)	IAM=pmie
		CONTROLFILE=$PCP_PMIECONTROL_PATH
    		;;
    *)		echo >&2 "$0: who the hell are you, bozo?"
    		exit 1
		;;
esac
CONTROLDIR=${CONTROLFILE}.d

tmp=`mktemp -d "$PCP_TMPFILE_DIR/$prog.XXXXXXXXX"` || exit 1
status=0

_cleanup()
{
    [ -n "$ACTION" -a "$ACTION" != status ] && _unlock
    rm -rf $tmp
}
trap "_cleanup; exit \$status" 0 1 2 3 15

cat >$tmp/usage <<End-of-File
# Usage: [options] command [host ...]

Options:
  -a,--all                      apply action to all matching hosts
  -c=NAME,--class=NAME    	${IAM} instances belong to the NAME class [default: default]
  -C=ARGS,--checkargs=ARGS	pass command line ARGS to ${IAM}_check
  -f,--force                    force action if possible
  -i=IDENT,--ident=IDENT        over-ride instance id (only for create and cond-create)
  -m,--migrate			migrate matching processes to farm services (for create and check)
  -N,--showme             	perform a dry run, showing what would be done
  -p=POLICY,--policy=POLICY	use POLICY as the class policy file [default: $PCP_ETC_DIR/pcp/${IAM}/class.d/<class>]
  -V,--verbose            	increase verbosity
  --help
End-of-File

_warning()
{
    echo >&2 "Warning: $1"
}

_error()
{
    echo >&2 "Error: $1"
    status=1
    exit
}

_lock()
{
    $SHOWME && return

# can assume $__dir is writeable ... if we get this far we're running
    # as root ...
    #
    __dir="$PCP_ETC_DIR/pcp/${IAM}"
    # demand mutual exclusion
    #
    rm -f $tmp/stamp $tmp/out
    __delay=200		# 1/10 of a second, so max wait is 20 sec
    while [ $__delay -gt 0 ]
    do
	if pmlock -v "$__dir/lock" >>$tmp/out 2>&1
	then
	    echo "$$" >"$__dir/lock"
	    break
	else
	    [ -f $tmp/stamp ] || touch -t `pmdate -30M %Y%m%d%H%M` $tmp/stamp
	    find $tmp/stamp -newer "$__dir/lock" -print 2>/dev/null >$tmp/tmp
	    if [ -s $tmp/tmp ]
	    then
		if [ -f "$__dir/lock" ]
		then
		    _warning "removing lock file older than 30 minutes (PID `cat $__dir/lock`)"
		    LC_TIME=POSIX ls -l "$__dir/lock"
		    rm -f "$__dir/lock"
		else
		    # there is a small timing window here where pmlock
		    # might fail, but the lock file has been removed by
		    # the time we get here, so just keep trying
		    #
		    :
		fi
	    fi
	fi
	pmsleep 0.1
	__delay=`expr $__delay - 1`
    done

if [ $__delay -eq 0 ]
    then
	# failed to gain mutex lock
	#
	if [ -f "$__dir/lock" ]
	then
	    _warning "is another $prog job running concurrently?"
	    LC_TIME=POSIX ls -l "$__dir/lock"
	else
	    _error "`cat $tmp/out`"
	fi
	_error "failed to acquire exclusive lock ($__dir/lock) ..."
	return 1
    else
	if $VERY_VERBOSE
	then
	    echo "Lock acquired `cat $__dir/lock` `ls -l $__dir/lock`"
	fi
    fi

return 0
}

_unlock()
{
    $SHOWME && return
    __dir="$PCP_ETC_DIR/pcp/${IAM}"
    if [ -f "$__dir/lock" ]
    then
	rm -f "$__dir/lock"
	$VERY_VERBOSE && echo "Lock released"
    fi
}

# FreeBSD's egrep does not support -r nor -Z
#
# This variant accepts -r or -rl as the first argument ...
# -r always outputs the filename at the start of the line (no matter
# how may filenames are processed, followed by a | (using a : causes
# all manner of problems with the hostname local:) followed by line
# of text from the file that matches the pattern
#
_egrep()
{
    if [ "$1" = "-rl" ]
    then
	__text=false
    elif [ "$1" = "-r" ]
    then
	__text=true
    else
	echo >&2 "Botch: _egrep() requires -r or -rl, not $1"
	return
    fi
    shift
    __pat="$1"
    shift

# skip errors from find(1) and egrep(1), only interested in matches for
    # real, existing files
    #
    find "$@" -type f 2>/dev/null \
    | while read __f
    do
	if echo "$__f" | grep -q -e '\.rpmsave$' -e '\.rpmnew$' -e '\.rpmorig$' \
	    -e '\.dpkg-dist$' -e '\.dpkg-old$' -e '\.dpkg-new$' >/dev/null 2>&1
	then
	    # ignore backup packaging files (daily and check scripts warn).
	    continue
	fi
	# possible race here with async execution of ${IAM}_check removing
	# the file after find saw it ... so check again for existance
	#
	[ -f "$__f" ] && grep -E "$__pat" "$__f" 2>/dev/null >$tmp/_egrep
	if [ -s $tmp/_egrep ]
	then
	    if $__text
	    then
		sed -e "s;^;$__f|;" $tmp/_egrep
	    else
		echo "$__f"
	    fi
	fi
    done
    rm -f $tmp/_egrep
}

_usage()
{
    pmgetopt --progname=$prog --config=$tmp/usage --usage 2>&1 \
    | sed >&2 -e 's/ \[default/\
                        [default/'
    cat >&2 <<End-of-File

Avaliable commands:
   [-c classname] create  host ...
   {-c classname|-i ident} cond-create host ...
   [-c classname] {start|stop|restart|destroy|check|status} [host ...]

and host may be a valid hostname or an egrep(1) pattern that matches
   the start of a hostname
End-of-File
    status=1
    exit
}

# find matching hosts from command line args ...
# 1. find control lines that contain each named host (or all hosts in the
#    case of no hosts on the command line)
# 2. if --class is specified, then restrict the hosts from 1. to those that
#    are in the named class
#
# Output file $tmp/args has this format
# <controlfile> <class> <host> <primary> <socks> <dir> <args> ...
#
_get_matching_hosts()
{
    rm -f $tmp/args
    if [ $# -eq 0 ]
    then
	# this regexp matches the start of all possible lines that
	# could be ${IAM} control lines, e.g
	# somehostname n ...
	#
	set -- '[^#$]'
    fi
    for _host
    do
	$VERY_VERBOSE && echo "Looking for host $_host in class $CLASS ..."
	rm -f $tmp/primary_seen
	if [ "$_host" = "$LOCALHOST" ]
	then
	    pat="($_host|LOCALHOSTNAME)"
	else
	    pat="$_host"
	fi
	_egrep -r "^($pat|#!#$pat)" $CONTROLFILE $CONTROLDIR \
	| sed -e 's/|/ /' \
	| while read ctl_file host primary socks dir args
	do
	    # do shell expansion of $dir if needed ... may juggle
	    # $dir and $args to ensure correct white space separation
	    # after shell expansion
	    #
	    # small problem exposed by qa/1216 ... if $pat starts .*
	    # we may pick up comments and _do_dir_and_args tries to
	    # parse something that is not a real control line
	    #
	    case "$host"
	    in
		\#!#*)
			_do_dir_and_args
			;;

\#*)	# other non-control comment line
			;;
		*)
			_do_dir_and_args
			;;
	    esac
	    ctl_line="$host $primary $socks $dir $args"

# the pattern above returns all possible control lines, but
	    # may need some further culling
	    #
	    ctl_host="`echo "$ctl_line" | sed -e 's/[ 	].*//'`"
	    if echo "$_host" | grep '^[a-zA-Z0-9][a-zA-Z0-9.-]*$' >/dev/null
	    then
		# $_host is a syntactically correct hostname so we need
		# an exact match on the first field (up to the first white
		# space)
		#
		if [ "$ctl_host" = "$_host" -o "$ctl_host" = "#!#$_host" ]
		then
		    :
		elif [ "$_host" = "$LOCALHOST" ]
		then
		    if [ "$ctl_host" = "LOCALHOSTNAME" -o "$ctl_host" = "#!#LOCALHOSTNAME" ]
		    then
			:
		    else
			# false match
			continue
		    fi
		else
		    # false match
		    continue
		fi
	    else
		# otherwise assume $_host is a regexp and this could match
		# all manner of lines, including comments (consider .*pat)
		#
		if echo "$ctl_host" | grep -E "^($pat|#!#$pat)" >/dev/null
		then
		    # so far so good (matches first field, not just whole
		    # line ... still some false matches to weed out
		    #
		    ok=false
		    case "$ctl_host"
		    in
			\#!\#*)
			    ok=true
			    ;;
			\#*)
			    ;;
			*)
			    ok=true
			    ;;
		    esac
		    $ok || continue;
		else
		    # false match
		    continue
		fi
	    fi
	    ctl_line=`echo "$ctl_line" | _expand_control | sed -e 's/^#!#//'`
	    check=`echo "$ctl_line" | wc -w | sed -e 's/ //g'`
	    if [ "$check" -lt 4 ]
	    then
		# bad control line ... missing at least directory, so warn and
		# ignore
		#
		_warning "$ctl_file: insufficient fields in control line for host `echo "$ctl_line" | sed -e 's/ .*//'`"
		continue
	    fi
	    primary=`echo "$ctl_line" | $PCP_AWK_PROG '{ print $2 }'`
	    if [ "$primary" = y ]
	    then
		touch $tmp/primary_seen
		if $EXPLICIT_CLASS || [ "$ACTION" = status ]
		then
		    # primary is not a concern here
		    #
		    :
		else
		    # don't dink with the primary ... systemctl (or the
		    # "rc" script) must be used to control the primary ${IAM}
		    #
		    if [ "$ACTION" != "check" ]; then
			_warning "$ctl_file: cannot $ACTION the primary ${IAM} from $prog"
		    fi
		    continue
		fi
	    fi
	    echo "$ctl_file" "$ctl_line"
	done >$tmp/tmp
	if $VERY_VERBOSE
	then
	    echo "Candidate control files:"
	    sed -e 's/ .*//' <$tmp/tmp \
	    | LC_COLLATE=POSIX sort \
	    | uniq
	fi
	if $EXPLICIT_CLASS
	then
	    cat $tmp/tmp \
	    | while read control host primary socks dir args
	    do
		if [ "$primary" = y ]
		then
		    class="primary"
		else
		    class=`_get_class "$control" "$host" "$dir"`
		fi
		if [ "$class" = "$CLASS" ]
		then
		    echo "$control" "$class" "$host" "$primary" "$socks" "$dir" "$args" >>$tmp/tmp2
		elif [ -z "$class" -a "$CLASS" = default ]
		then
		    echo "$control" default "$host" "$primary" "$socks" "$dir" "$args" >>$tmp/tmp2
		else
		    $VERY_VERBOSE && echo "No match for control $control host $host directory $dir class $class"
		fi
	    done
	    if [ -s $tmp/tmp2 ]
	    then
		mv $tmp/tmp2 $tmp/tmp
	    else
		rm $tmp/tmp
		touch $tmp/tmp
	    fi
	    if $VERY_VERBOSE
	    then
		echo "Matching control files:"
		sed -e 's/ .*//' $tmp/tmp
	    fi
	else
	    # add "class" of "-" to make $tmp/tmp format the same in
	    # both cases
	    #
	    sed <$tmp/tmp >$tmp/tmp2 -e 's/ / - /'
	    mv $tmp/tmp2 $tmp/tmp
	fi
	ninst=`wc -l <$tmp/tmp | sed -e 's/ //g'`
	if [ "$ninst" -eq 0 ]
	then
	    if [ "$ACTION" = create ]
	    then
		# that's good ...
		:
	    elif $FIND_ALL_HOSTS
	    then
		if $EXPLICIT_CLASS
		then
		    _warning "no host defined in class $CLASS for any ${IAM} control file"
		elif [ -f $tmp/primary_seen ]
		then
		    # Warning reported above, don't add chatter here
		    #
		    :
		else
		    _warning "no host defined in any ${IAM} control file"
		fi
	    else
		if $EXPLICIT_CLASS
		then
		    _warning "host $_host not defined in class $CLASS for any ${IAM} control file"
		elif [ -f $tmp/primary_seen ]
		then
		    # Warning reported above, don't add chatter here
		    #
		    :
		else
		    _warning "host $_host not defined in any ${IAM} control file"
		fi
	    fi
	    continue
	fi
	if [ "$ACTION" != status ]
	then
	    $PCP_AWK_PROG <$tmp/tmp '$4 != "?" { print $3 }' \
	    | LC_COLLATE=POSIX sort \
	    | uniq -c \
	    | grep -v ' 1 ' >$tmp/tmp2
	    if [ -s $tmp/tmp2 ] && ! $DOALL
	    then
		dups=`$PCP_AWK_PROG <$tmp/tmp2 '{ print $2 }' | tr '\012' ' ' | sed -e 's/  *$//'`
		if $EXPLICIT_CLASS
		then
		    _error "host(s) ($dups) defined in class $CLASS multiple times, don't know which instance to $ACTION"
		else
		    _error "host(s) ($dups) defined multiple times, don't know which instance to $ACTION"
		fi
	    fi
	fi

cat $tmp/tmp >>$tmp/args
    done
    if [ -f $tmp/args ]
    then
	if $VERY_VERBOSE
	then
	    echo "_get_matching_hosts results:"
	    echo "# control class host dir"
	    cat $tmp/args \
	    | while read control class host primary socks dir other
	    do
		echo "$control $class $host $dir"
	    done
	    echo "# end"
	fi
    fi
}

# get class for a specific ${IAM} instance
# $1 = control
# $2 = host (expanded) [need to match either expanded or unexpanded names]
# $3 = directory (expanded) [need to match either expanded or unexpanded name
#      or name with just $PCP_* vars unexpanded]
#
_get_class()
{
    control="$1"
    # need space at end so hostname looks like it does in a control line
    host="`echo "$2 " | _unexpand_control | sed -e 's/ $//'`"
    dir="`echo "$3" | _unexpand_control`"
    alt_dir="`echo "$3" | _unexpand_pcp_control`"
    class=`$PCP_AWK_PROG <"$control" '
BEGIN			{ class = "" }
/^[$]class=/		{ class = $1; sub(/[$]class=/,"",class) }
$4 == "'"$dir"'" || $4 == "'"$alt_dir"'" || $4 == "'"$3"'" 	{
			  if ($1 == "'"$host"'" || $1 == "#!#'"$host"'" ||
			      $1 == "'"$2"'" || $1 == "#!#'"$2"'") {
				  print class
				  exit
			  }
			}'`
    [ -z "$class" ] && class=default
    echo "$class"
}

# $1 is policy file (known to already exist)
# $2 is section name (expect alphabetic(s): at start of line)
#
_get_policy_section()
{
    $PCP_AWK_PROG <"$1" '
NF == 0			{ next }
$1 == "['"$2"']"	{ want = 1; next }
$1 ~ /^\[[a-z]*]$/	{ want = 0; next }
want == 1		{ print }'
}

# find the PID for the ${IAM} that is dinking in the $1 directory
#
_get_pid()
{
    if [ ${IAM} = pmlogger ]
    then
	_egrep -rl "^$1/[^/]*$" $PCP_TMP_DIR/${IAM} \
	| sed -e 's;.*/;;' \
	| grep -f $tmp/pids
    else
	$PCP_BINADM_DIR/pmie_dump_stats $PCP_TMP_DIR/${IAM}/* 2>&1 \
	| grep ":logfile=$1" \
	| sed -e 's/:.*//' \
	| grep -f $tmp/pids
    fi
}

# do what ${IAM}_check does to a control line in terms of variable
# expansion
# 
_expand_control()
{
    sed \
	-e 's/[ 	][ 	]*/ /g' \
	-e "s;PCP_ARCHIVE_DIR/;$PCP_ARCHIVE_DIR/;g" \
	-e "s;PCP_LOG_DIR/;$PCP_LOG_DIR/;g" \
	-e "s/^LOCALHOSTNAME /$LOCALHOST /g" \
	-e "s/\$[^a-zA-Z0-9]\$LOCALHOSTNAME/\\1$LOCALHOST/g" \
    # end
}

# reverse the changes from _expand_control()
#
_unexpand_control()
{
    sed \
	-e "s;$PCP_ARCHIVE_DIR/;PCP_ARCHIVE_DIR/;g" \
	-e "s;$PCP_LOG_DIR/;PCP_LOG_DIR/;g" \
	-e "s/^$LOCALHOST /LOCALHOSTNAME /g" \
	-e "s/\$[^a-zA-Z0-9]\$$LOCALHOST/\\1LOCALHOSTNAME/g" \
    # end
}

# reverse the changes for just the critical $PCP_* vars from
# _expand_control()
#
_unexpand_pcp_control()
{
    sed \
	-e "s;$PCP_ARCHIVE_DIR/;PCP_ARCHIVE_DIR/;g" \
	-e "s;$PCP_LOG_DIR/;PCP_LOG_DIR/;g" \
    # end
}

# verbose diagosis of failed state
# $1 = host
# $2 = dir (pmlogger) or logfile (pmie)
#
_diagnose()
{
    if [ ${IAM} = pmlogger ]
    then
	if [ -f "$2/pmlogger.log" ]
	then
	    sed <"$2/pmlogger.log" \
		-e '/^[ 	]*$/d' \
		-e '/^preprocessor cmd:/d' \
		-e '/^Config parsed/d' \
		-e '/^Group \[/,/^} logged/d' \
		-e 's/^/   + /' \
	    # end
	else
	    echo "   + pmlogger.log not available"
	fi
    else
	# TODO ... need some filtering here for pmie logs
	if [ -f "$2" ]
	then
	    sed <"$2" \
		-e '/^[ 	]*$/d' \
		-e 's/^/   + /' \
	    # end
	else
	    echo "   + pmie.log not available"
	fi
    fi
}

# check ${IAM} really started
#
# $1 = dir as it appears on the $PCP_TMP_DIR/${IAM} files (so a real path,
#      not a possibly sybolic path from a control file)
#
_check_started()
{
    $SHOWME && return 0
    dir="$1"
    max=600		# 1/10 of a second, so 1 minute max
    i=0
    $VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N "Started? ""$PCP_ECHO_C"
    while [ $i -lt $max ]
    do
	$VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N ".""$PCP_ECHO_C"
	# rebuild active pids list, then check for our $dir
	_get_pids_by_name ${IAM} | sed -e 's/.*/^&$/' >$tmp/pids
	pid=`_get_pid "$dir"`
	[ -n "$pid" ] && break
	i=`expr $i + 1`
	pmsleep 0.1
    done
    if [ -z "$pid" ]
    then
	$VERY_VERBOSE && $PCP_ECHO_PROG " no"
	_warning "${IAM} failed to start for host $host and directory $dir"
	sts=1
    else
	$VERY_VERBOSE && $PCP_ECHO_PROG " yes"
	if $MIGRATE
	then
	    # Add new process to the farm service (pmlogger_farm or pmie_farm).
	    # It will be removed automatically if/when it exits.
	    $VERBOSE && vflag="-v"
	    migrate_pid_service $vflag "$pid" ${IAM}_farm.service
	fi
	sts=0
    fi
    return $sts
}

# check ${IAM} really stopped
#
# $1 = dir as it appears on the $PCP_TMP_DIR/${IAM} files (so a real path,
#      not a possibly symbolic path from a control file)
#
_check_stopped()
{
    $SHOWME && return 0
    dir="$1"
    max=50		# 1/10 of a second, so 5 secs max
    i=0
    $VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N "Stopped? ""$PCP_ECHO_C"
    while [ $i -lt $max ]
    do
	$VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N ".""$PCP_ECHO_C"
	# rebuild active pids list, then check for our $dir
	_get_pids_by_name ${IAM} | sed -e 's/.*/^&$/' >$tmp/pids
	pid=`_get_pid "$dir"`
	[ -z "$pid" ] && break
	i=`expr $i + 1`
	pmsleep 0.1
    done
    if [ -n "$pid" ]
    then
	$VERY_VERBOSE && $PCP_ECHO_PROG " no"
	_warning "${IAM} failed to stop for host $host and directory $dir (PID=$pid)"
	sts=1
    else
	$VERY_VERBOSE && $PCP_ECHO_PROG " yes"
	sts=0
    fi
    return $sts
}

# status command
#
_do_status()
{
    if [ ${IAM} = pmlogger ]
    then
	if $VERBOSE
	then
	    fmt="%-20s %-17s %-8s %7s %-8s %s\n"
	else
	    fmt="%-20s %-17s %-8s %7s %-8s\n"
	fi
    else
	if $VERBOSE
	then
	    fmt="%-20s %5s %11s %-8s %7s %-8s %s\n"
	else
	    fmt="%-20s %5s %11s %-8s %7s %-8s\n"
	fi
    fi

PICK_HOSTS=false
    [ -s $tmp/args ] && PICK_HOSTS=true

# see if system-level controls have stopped (all) ${IAM} processes
    #
    systemctl_state=''
    if which systemctl >/dev/null 2>&1
    then
	if [ -n "$PCP_SYSTEMDUNIT_DIR" -a -f "$PCP_SYSTEMDUNIT_DIR/${IAM}.service" ]
	then
	    # systemctl is handling this
	    #
	    if [ "`systemctl is-enabled ${IAM}.service`" = enabled ]
	    then
		if [ "`systemctl is-active ${IAM}.service`" = inactive ]
		then
		    systemctl_state='stopped by systemctl'
		fi
	    else
		systemctl_state='disabled by systemctl'
	    fi
	fi
    fi

if [ ${IAM} = pmlogger ]
    then
	# for pmlogger the entry here is the full pathname of
	# the current archive
	#
	find $PCP_TMP_DIR/${IAM} -type f -a ! -name primary \
	| while read f
	do
	    # skip entries if the process is no longer running
	    #
	    _pid=`echo "$f" \
	          | sed -e "s;^$PCP_TMP_DIR/${IAM}/;;" \
		  | grep -f $tmp/pids`
	    [ -z "$_pid" ] && continue
	    sed -n -e 3p $f \
	    | _expand_control
	done >>$tmp/archive
    else
	# for pmie, the entry here is ...
	# pid:logfile:eval_actual
	#
	$PCP_BINADM_DIR/pmie_dump_stats $PCP_TMP_DIR/pmie/* 2>&1 \
	| $PCP_AWK_PROG -F':' '
BEGIN			{ OFS = ":" }
$2 ~ /logfile=/		{ logfile = $2
			  sub(/^logfile=/,"",logfile)
			}
$2 ~ /numrules=/	{ rules = $2
			  sub(/^numrules=/,"",rules)
			}
$2 ~ /eval_actual=/	{ evals = $2
			  sub(/^eval_actual=/,"",evals)
			  print $1,logfile,rules,evals
			}' \
	| _expand_control >$tmp/pmiestats
    fi

find $CONTROLFILE $CONTROLDIR -type f 2>/dev/null \
    | while read control
    do
	class=''
	sed <"$control" -n \
	    -e '/^[^#]/p' \
	    -e '/^#!#/p ' \
	| _expand_control \
	| while read host primary socks dir args
	do
	    # do shell expansion of $dir if needed ... may juggle
	    # $dir and $args to ensure correct white space separation
	    # after shell expansion
	    #
	    _do_dir_and_args

state=running
	    case "$host"
	    in
		\$class=*)	class=`echo "$host" | sed -e 's/.*=//'`
				continue
				;;
		\$*)		continue
				;;
		\#!\#*)		host=`echo "$host" | sed -e 's/^#!#//'`
				state="stopped by $prog"
				;;
	    esac
	    if [ -z "$dir" ]
	    then
		# bad control line ... already reported in
		# _get_matching_hosts() before _do_status() was called,
		# so silently ignore it here
		#
		continue
	    fi
	    if $PICK_HOSTS
	    then
		# remove this one from $tmp/args ... so at the end we can
		# see if any have been missed
		#
		rm -f $tmp/match
		$PCP_AWK_PROG <$tmp/args >$tmp/tmp '
BEGIN				{ found = 0 }
found == 0 && $3 == "'"$host"'" && $6 == "'"$dir"'"	{ print NR >>"'$tmp/match'"; found = 1; next }
				{ print }'
		if [ -f $tmp/match ]
		then
		    mv $tmp/tmp $tmp/args
		else
		    continue
		fi
	    fi
	    archive=''
	    evals=''
	    if [ ${IAM} = pmlogger ]
	    then
		archive=`grep "^$dir/[^/]*$" $tmp/archive \
			 | sed -e 's;.*/;;'`
		check=`echo "$archive" | wc -l | sed -e 's/ //g'`
		if [ "$check" -gt 1 ]
		then
		    cat >&2 $tmp/archive
		    ls >&2 -l $PCP_TMP_DIR/${IAM}
		    _error "Botch: more than one archive matches directory $dir"
		fi
		pid=`_egrep -rl "^$dir/[^/]*$" $PCP_TMP_DIR/${IAM} \
		     | sed -e 's;.*/;;' \
		     | grep -f $tmp/pids`
		[ -z "$archive" ] && archive='?'
		[ -z "$pid" ] && pid='?'
	    else
		pid=''
		rules=''
		evals=''
		eval `$PCP_AWK_PROG -F':' <$tmp/pmiestats '$2 == "'"$dir"'" { print "pid=" $1 " rules=" $3 " evals=" $4 }'`
		[ -z "$pid" ] && pid='?'
		[ -z "$rules" ] && rules='?'
		[ -z "$evals" ] && evals='?'
	    fi
	    [ -z "$class" ] && class=default
	    if [ "$archive" = '?' -o "$evals" = '?' ]
	    then
		if [ "$state" = running ]
		then
		    if [ -n "$systemctl_state" ]
		    then
			state="$systemctl_state"
		    else
			state="dead"
		    fi
		fi
	    fi
	    $VERBOSE && state="$state|$dir"
	    if [ "$primary" = y ]
	    then
		# "primary" is a pseudo-class and in particular don't set
		# $class as this may screw up the next pmlogger/pmie line
		# (if any) in this control file
		#
		if [ ${IAM} = pmlogger ]
		then
		    printf "$fmt" "$host" "$archive" "primary" "$pid" "$state"
		else
		    printf "$fmt" "$host" "$rules" "$evals" "primary" "$pid" "$state"
		fi
	    else
		if [ ${IAM} = pmlogger ]
		then
		    printf "$fmt" "$host" "$archive" "$class" "$pid" "$state"
		else
		    printf "$fmt" "$host" "$rules" "$evals" "$class" "$pid" "$state"
		fi
	    fi
	done
    done \
    | LC_COLLATE=POSIX sort >$tmp/out

if [ -s $tmp/out ]
    then
	if [ ${IAM} = pmlogger ]
	then
	    if $VERBOSE
	    then
		printf "$fmt" "pmcd Host" Archive Class PID State "Instance Id"
	    else
		printf "$fmt" "pmcd Host" Archive Class PID State
	    fi
	else
	    if $VERBOSE
	    then
		printf "$fmt" "pmcd Host" Rules Evaluations Class PID State "Instance Id"
	    else
		printf "$fmt" "pmcd Host" Rules Evaluations Class PID State
	    fi
	fi
	if $VERBOSE
	then
	    if [ ${IAM} = pmlogger ]
	    then
		cat $tmp/out \
		| while read host archive class pid state
		do
		    dir=`echo "$state" | sed -e 's/.*|//'`
		    state=`echo "$state" | sed -e 's/|.*//'`
		    if [ ${IAM} = pmlogger ]
		    then
			ident=`echo "$dir" | sed -e 's;.*/;;'`
		    else
			ident=`echo "$dir" | sed -e 's;/pmie.log;;' -e 's;.*/;;'`
		    fi
		    printf "$fmt" "$host" "$archive" "$class" "$pid" "$state" "$ident"
		    if [ "$state" = dead ]
		    then
			_diagnose "$host" "$dir" 
		    fi
		done
	    else
		cat $tmp/out \
		| while read host rules evals class pid state
		do
		    dir=`echo "$state" | sed -e 's/.*|//'`
		    state=`echo "$state" | sed -e 's/|.*//'`
		    ident=`echo "$dir" | sed -e 's;/[^/]*$;;' -e 's;.*/;;'`
		    printf "$fmt" "$host" "$rules" "$evals" "$class" "$pid" "$state" "$ident"
		    if [ "$state" = dead ]
		    then
			_diagnose "$host" "$dir" 
		    fi
		done
	    fi
	else
	    cat $tmp/out
	fi
    fi
    if [ -s $tmp/args ]
    then
	echo "No ${IAM} configuration found for:"
	cat $tmp/args \
	| while read control class args_host primary socks args_dir args
	do
	    if [ X"$class" != X- ]
	    then
		echo "  host $args_host directory $args_dir class $class"
	    else
		echo "  host $args_host directory $args_dir"
	    fi
	done
    fi
}

# build aggregated ${IAM} config file from multiple selected control
# files
#
# $1 = the remote host
# $2 ... = the control files
#
_resolve_configs()
{
    _host="$1"
    shift
    rm -f $tmp/config $tmp/done_conf
    rm -f $tmp/config.0 $tmp/config.1 $tmp/config.2 $tmp/config.3
    for c
    do
	sed -n <$c \
	    -e 's/[ 	][ 	]*/ /g' \
	    -e '/^#/d' \
	    -e '/^\$/d' \
	    -e '/^ *$/d' \
	    -e '/ -c/{
s/.*-c *$[^ ]*$.*/\1/p
}' \
	| while read config
	do
	    if [ ! -f "$config" ]
	    then
		# config does not exist, would normally expect it to be
		# created at the first use in ${IAM}_check ... so do that
		# now, unless it has already been done
		#
		[ -f $tmp/done_conf ] && continue
		rm -f $tmp/tmp
		if [ ${IAM} = pmlogger ]
		then
		    if ! pmlogconf -c -q -h "$_host" $tmp/tmp </dev/null >$tmp/err 2>&1
		    then
			_warning "pmlogconf failed"
			cat $tmp/diag
			echo "=== start pmlogconf file ==="
			cat $tmp/tmp
			echo "=== end pmlogconf file ==="
			continue
		    fi
		else
		    if ! pmieconf -cF -f $tmp/tmp </dev/null 2>$tmp/err 2>&1
		    then
			_warning "pmieconf failed"
			cat $tmp/diag
			echo "=== start pmieconf file ==="
			cat $tmp/tmp
			echo "=== end pmieconf file ==="
			continue
		    fi
		fi
		config=$tmp/tmp
		touch $tmp/done_conf
	    fi
	    # now have the desired config file for this class ... split
	    # it into parts:
	    # 0 - any #! and preamble before the first config or conf lines
	    # 1 - any pm{log,ie}conf lines
	    # 2 - any config lines
	    # 3 - any [access] section
	    #
	    rm -f $tmp/[0-3]
	    $PCP_AWK_PROG <"$config" '
BEGIN		{ part = 2; state = 0 }
NR == 1 && /^#pmlogconf /		{ part = 0 }
NR == 1 && /^\/\/ pmieconf-pmie/	{ part = 0 }
state == 1 && $1 == "#+"		{ state = 2; part = 1 }
state == 3 && $1 !~ /^#/		{ state = 4; part = 2 }
/^\/\/ --- START GENERATED SECTION (do not change this section) ---/ \
					{ part = 1 }
/^\[access]/				{ part = 3 }
					{ print >"'$tmp/'" part }
/^# DO NOT UPDATE THE INITIAL SECTION OF THIS FILE/ \
					{ state = 1 }
/^# DO NOT UPDATE THE FILE ABOVE THIS LINE/ \
					{ state = 3 }
/^\/\/ --- END GENERATED SECTION (changes below will be preserved) ---/ \
					{ part = 2 }'
	    if $VERY_VERY_VERBOSE
	    then
		echo "$config split ->"
		for p in 0 1 2 3
		do
		    echo "--- part $p ---"
		    [ -f $tmp/$p ] && cat $tmp/$p
		done
		echo "--- end parts ---"
	    fi
	    if [ -f $tmp/0 ]
	    then
		if [ -f $tmp/config.0 ]
		then
		    : TODO, may be different?
		else
		    mv $tmp/0 $tmp/config.0
		fi
	    fi
	    # we concat these blocks of pm{log,ie}conf controls and
	    # config fragments ... pm{log,ie}conf will cull any
	    # duplicates when the config is regenerated in pm${IAM}_check
	    #
	    [ -f $tmp/1 ] && cat $tmp/1 >>$tmp/config.1
	    # concat these explicit config fragments together
	    [ -f $tmp/2 ] && cat $tmp/2 >>$tmp/config.2
	    if [ -f $tmp/3 ]
	    then
		if [ -f $tmp/config.3 ]
		then
		    : TODO, may be different?
		else
		    mv $tmp/3 $tmp/config.3
		fi
	    fi
	done
    done

# assemble to final config file ...
    #
    for p in 0 1 2 3
    do
	[ -f $tmp/config.$p ] && cat $tmp/config.$p >>$tmp/config
    done
    touch $tmp/config
}

# cond-create command
#
_do_cond_create()
{
    sts=0
    FROM_COND_CREATE=true
    __POLICY="$POLICY"		# value on entry, POLICY gets reset below

for host
    do
	echo 0 >$tmp/condition-true
	# if no -p, then we're going to use all the class policy files,
	# unless none exist in which case we'll use the default policy.
	#
	if [ "$__POLICY" = $tmp/policy ]
	then
	    find "$PCP_ETC_DIR/pcp/${IAM}/class.d" -type f \
	    | sed -e '/class.d\/pmfind$/d' >$tmp/class
	    if [ -s $tmp/class ]
	    then
		# we have user-defined classes, use 'em first, then
		# marker, then the default pmfind class
		#
		cat $tmp/class
		echo "End-of-User-Classes"
		echo "$PCP_ETC_DIR/pcp/${IAM}/class.d/pmfind"
	    else
		# fallback to the default pmfind class
		#
		echo "$PCP_ETC_DIR/pcp/${IAM}/class.d/pmfind"
	    fi
	else
	    # explicit policy file from command line -p or implicit policy
	    # file from command line -c ... use that
	    #
	    echo "$__POLICY"
	fi \
	| while read policy
	do
	    if [ "$policy" = "End-of-User-Classes" ]
	    then
		if [ "`cat $tmp/condition-true`" -gt 0 ]
		then
		    $VERY_VERBOSE && echo "host: $host condition true for some class, skip pmfind class"
		    break
		fi
		continue
	    fi
	    _get_policy_section "$policy" create >$tmp/cond
	    if [ -s $tmp/cond ]
	    then
		# expect func(args...)
		#
		sed -e '/^#/d' <$tmp/cond \
		| grep -v '[a-z][^(]*(.*)[ 	]*$' >$tmp/tmp
		if [ -s $tmp/tmp ]
		then
		    _warning "$policy: bad create clause(s) will be ignored"
		    cat >&2 $tmp/tmp
		fi
		rm -f $tmp/match
		grep '[a-z][^(]*(.*)[ 	]*$' <$tmp/cond \
		| sed -e 's/(/ /' -e 's/)[ 	]*$//' \
		| while read func args
		do
		    case "$func"
		    in
			exists)
			    if pminfo -h "$host" "$args" >/dev/null 2>&1
			    then
				touch $tmp/match
				$VERBOSE && echo "$policy: host $host exists($args) true"
				break
			    else
				$VERY_VERBOSE && echo "$policy: host $host exists($args) false"
			    fi
			    ;;

values)
			    if pmprobe -h "$host" "$args" 2>/dev/null \
			       | $PCP_AWK_PROG '
BEGIN	{ sts=1 }
$2 > 0	{ sts=0; exit }
END	{ exit(sts) }'
			    then
				touch $tmp/match
				$VERBOSE && echo "$policy: host $host values($args) true"
				break
			    else
				$VERY_VERBOSE && echo "$policy: host $host values($args) false"
			    fi
			    ;;

condition)
			    echo "pm_ctl.check = $args" >$tmp/derived
			    PCP_DERIVED_CONFIG=$tmp/derived pmprobe -v -h "$host" pm_ctl.check >$tmp/tmp
			    numval=`cut -d ' ' -f 2 <$tmp/tmp`
			    val=`cut -d ' ' -f 3 <$tmp/tmp`
			    if [ "$numval" -gt 1 ]
			    then
				_warning "$policy: condition($args) has $numval values, not 1 as expected, using first value ($val)"
			    fi
			    if [ "$numval" -gt 0 ]
			    then
				if [ "$val" -gt 0 ]
				then
				    touch $tmp/match
				    $VERBOSE && echo "$policy: host $host condition($args) true, value $val"
				    break
				else
				    $VERY_VERBOSE && echo "$policy: host $host condition($args) false, value $val"
				fi
			    else
				$VERY_VERBOSE && echo "$policy: host $host condition($args) false, numval $numval"

fi
			    ;;

hostname)
			    if echo "$host" | grep -E "$args" >/dev/null
			    then
				touch $tmp/match
				$VERBOSE && echo "$policy: host $host hostname($args) true"
			    else
				$VERY_VERBOSE && echo "$policy: host $host hostname($args) false"
				break
			    fi
			    ;;
		    esac
		done
		if [ -f $tmp/match ]
		then
		    POLICY="$policy"
		    if _do_create "$host"
		    then
			# on success $tmp/control is the control file for
			# this class
			#
			n=`cat $tmp/condition-true`
			n=`expr $n + 1`
			mv $tmp/control $tmp/control.$n
			echo "$policy" >$tmp/policy.$n
			echo $n >$tmp/condition-true
		    else
			_error "$policy: create failed for host $host"
		    fi
		fi
	    else
		$VERY_VERBOSE && echo "$policy: no [create] section, skip class"
	    fi
	done
	n=`cat $tmp/condition-true`
	if [ "$n" -eq 0 ]
	then
	    $VERBOSE && _warning "no instance created for host $host"
	    continue
	elif [ "$n" -eq 1 ]
	then
	    # just one class "matches", use the control file from do_create()
	    #
	    mv $tmp/control.$n $tmp/control
	    POLICY="`cat $tmp/policy.1`"
	else
	    # some work to be done ...
	    #
	    _resolve_configs "$host" $tmp/control.*
	    if $VERBOSE
	    then
		echo "--- start combined config file ---"
		cat $tmp/config
		echo "--- end combined config file ---"
	    fi
	    [ -z "$IDENT" ] && IDENT=pmfind-$host
	    # build a pmfind-like control file
	    #
	    if [ ${IAM} = pmlogger ]
	    then
		target_dir=$PCP_ARCHIVE_DIR/$IDENT
		cat <<End-of-File >$tmp/control
# DO NOT REMOVE OR EDIT THE FOLLOWING LINE
\$version=1.1

\$class=pmfind
$host n n PCP_ARCHIVE_DIR/$IDENT -c ./$IDENT.config -r
End-of-File
	    else
		target_dir=$PCP_LOG_DIR/pmie/$IDENT
		cat <<End-of-File >$tmp/control
# DO NOT REMOVE OR EDIT THE FOLLOWING LINE
\$version=1.1

\$class=pmfind
$host n n PCP_LOG_DIR/pmie/$IDENT/pmie.log -c ./$IDENT.config
End-of-File
	    fi
	    if $SHOWME
	    then
		echo + mkdir_and_chown "$target_dir" 755 $PCP_USER:$PCP_GROUP
	    else
		mkdir_and_chown "$target_dir" 755 $PCP_USER:$PCP_GROUP >$tmp/tmp 2>&1
		if [ ! -d "$target_dir" ]
		then
		    cat $tmp/tmp
		    _error "cannot create directory ($target_dir)"
		fi
	    fi
	    $CP $tmp/config $target_dir/$IDENT.config
	fi
	# this bit is more or less replicated from do_create(),
	# but we don't need to replicate error checking that's
	# already been done
	#
	if [ -n "$IDENT" ]
	then
	    ident="$IDENT"
	else
	    _get_policy_section "$POLICY" ident >$tmp/tmp
	    if [ -s $tmp/tmp ]
	    then
		ident=`sed -e "s;%h;$host;g" <$tmp/tmp`
	    else
		ident="$host"
	    fi
	fi
	dir=`$PCP_AWK_PROG <$tmp/control '
$1 == "'"$host"'"	{ print $4 }'`
	if $VERBOSE
	then
	    echo "--- start control file ---"
	    cat $tmp/control
	    echo "--- end control file ---"
	fi
	$VERBOSE && echo "Installing control file: $CONTROLDIR/$ident"

$CP $tmp/control "$CONTROLDIR/$ident"
	$CHECK $CHECKARGS -c "$CONTROLDIR/$ident"
	dir_args="`echo "$dir" | _expand_control`"
	_check_started "$dir_args" || sts=1
    done

return $sts
}

# create command
#
# if FROM_COND_CREATE is true, we're doing work on behalf of the cond-create
# command, and nothing is installed, but the control file is left in
# $tmp/control to be used back in cond_create()
#
_do_create()
{
    sts=0
    for host
    do
	if [ -n "$IDENT" ]
	then
	    # -i from command line ... 
	    #
	    ident="$IDENT"
	else
	    # -c from command line ... 
	    #
	    _get_policy_section "$POLICY" ident >$tmp/tmp
	    if [ -s $tmp/tmp ]
	    then
		check=`wc -w <$tmp/tmp | sed -e 's/ //g'`
		[ "$check" -ne 1 ] &&
		    _error "[ident] section is invalid in $POLICY policy file (expect a single word, not $check words)"
		ident=`sed -e "s;%h;$host;g" <$tmp/tmp`
	    else
		ident="$host"
	    fi
	fi
	[ -f $CONTROLDIR/"$ident" ] && _error "control file $CONTROLDIR/$ident already exists"
	if $EXPLICIT_CLASS
	then
	    # use classname from -c
	    :
	else
	    # try to extract from [class] section, else fallback to basename
	    # of the policy file (this was the scheme before the [class]
	    # section was introduced)
	    #
	    CLASS=`_get_policy_section "$POLICY" class`
	    [ -z "$CLASS" ] && CLASS=`echo "$POLICY" | sed -e 's;.*/;;'`
	fi
	cat <<End-of-File >$tmp/control
# created by $prog on `date`
End-of-File
	_get_policy_section "$POLICY" control >$tmp/tmp
	[ ! -s $tmp/tmp ] && _error "[control] section is missing from $POLICY policy file"
	if grep '^\$class=' $tmp/tmp >/dev/null
	then
	    :
	else
	    echo "\$class=$CLASS" >>$tmp/control
	fi
	if grep '^\$version=1.1$' $tmp/tmp >/dev/null
	then
	    :
	else
	    $VERBOSE && echo "Adding \$version=1.1 to control file"
	    echo '#DO NOT REMOVE OR EDIT THE FOLLOWING LINE' >>$tmp/control
	    echo '$version=1.1' >>$tmp/control
	fi
	sed -e "s;%h;$host;g" -e "s;%i;$ident;g" <$tmp/tmp >>$tmp/control
	primary=`$PCP_AWK_PROG <$tmp/control '
$1 == "'"$host"'"	{ print $2 }'`
	if [ -z "$primary" ]
	then
	    echo "control file ..."
	    cat $tmp/control
	    _error "cannot find primary field from control file"
	fi
	if [ "$primary" = y ]
	then
	    # don't dink with the primary ... systemctl (or the "rc" script)
	    # must be used to control the primary ${IAM}
	    #
	    _error "primary ${IAM} cannot be created from $prog"
	fi
	dir=`$PCP_AWK_PROG <$tmp/control '
$1 == "'"$host"'"	{ print $4 }'`
	if [ -z "$dir" ]
	then
	    echo "control file ..."
	    cat $tmp/control
	    _error "cannot find directory field from control file"
	fi
	if [ "$host" = "$LOCALHOST" ]
	then
	    pat_host="($host|LOCALHOSTNAME)"
	    pat_dir="($dir|`echo "$dir" | sed -e "s;$host;LOCALHOSTNAME;"`)"
	else
	    pat_host="$host"
	    pat_dir="$dir"
	fi
	_egrep -rl "^($pat_host|#!#$pat_host)[ 	].*[ 	]$pat_dir([ 	]|$)" $CONTROLFILE $CONTROLDIR >$tmp/out
	[ -s $tmp/out ] && _error "host $host and directory $dir already defined in `cat $tmp/out`"
	if $FROM_COND_CREATE
	then
	    # skip this part (the real create and start) ...
	    :
	else
	    if $VERBOSE
	    then
		echo "--- start control file ---"
		cat $tmp/control
		echo "--- end control file ---"
	    fi
	    $VERBOSE && echo "Installing control file: $CONTROLDIR/$ident"
	    $CP $tmp/control "$CONTROLDIR/$ident"
	    $CHECK $CHECKARGS -c "$CONTROLDIR/$ident"
	    dir_args="`echo "$dir" | _expand_control`"
	    _check_started "$dir_args" || sts=1
	fi
    done

return $sts
}

# destroy command
#
_do_destroy()
{
    mv $tmp/args $tmp/destroy
    cat $tmp/destroy \
    | while read control class args_host primary socks args_dir args
    do
	echo "$control" "$class" "$args_host" "$primary" "$socks" "$args_dir" "$args" >$tmp/args
	if _do_stop -q
	then
	    :
	else
	    _error "control file changes skipped because ${IAM} could not be stopped"
	fi
	dir=`echo "$args_dir" | _unexpand_control`
	alt_dir="`echo "$args_dir" | _unexpand_pcp_control`"
	host=`echo "$args_host " | _unexpand_control | sed -e 's/ $//'`
	# need to match either expanded or unexpanded host name, with
	# or without #!# prefix
	#
	$PCP_AWK_PROG <"$control" >$tmp/control '
$1 == "'"$args_host"'" && ($4 == "'"$dir"'" || $4 == "'"$alt_dir"'")	{ next }
$1 == "'"#!#$args_host"'" && ($4 == "'"$dir"'" || $4 == "'"$alt_dir"'")	{ next }
$1 == "'"$host"'" && ($4 == "'"$dir"'" || $4 == "'"$alt_dir"'")		{ next }
$1 == "'"#!#$host"'" && ($4 == "'"$dir"'" || $4 == "'"$alt_dir"'")	{ next }
									{ print }'
	if cmp -s "$control" $tmp/control
	then
	    $VERBOSE && echo "${IAM} for host $host and directory $dir already removed from control file $control"
	else
	    if $VERY_VERBOSE
	    then
		echo "Diffs for control file $control after removing host $host and directory $dir ..."
		diff "$control" $tmp/control
	    elif $VERBOSE
	    then
		echo "Remove ${IAM} for host $host and directory $dir in control file $control"
	    fi
	fi
	sed -n <$tmp/control >$tmp/tmp -e '/^[^$# 	]/p'
	if [ -s $tmp/tmp ]
	then
	    # at least one active control line left in $tmp/control ...
	    # cannot remove it
	    #
	    $CP $tmp/control "$control"
	else
	    $VERBOSE && echo "Remove control file $control"
	    $RM "$control"
	fi
    done

return 0
}

# start command
#
_do_start()
{
    restart=false
    [ "$1" = '-r' ] && restart=true
    sts=0
    cat $tmp/args \
    | while read control class args_host primary socks args_dir args
    do
	$VERBOSE && echo "Looking for ${IAM} using directory $args_dir ..."
	pid=`_get_pid "$args_dir"`
	if [ -n "$pid" ]
	then
	    $VERBOSE && echo "${IAM} PID $pid already running for host $args_host, nothing to do"
	    $VERBOSE && $restart && echo "Not expected for restart!"
	    if $MIGRATE
	    then
		$VERBOSE && vflag="-v"
		migrate_pid_service $vflag "$pid" ${IAM}_farm.service
	    fi
	    continue
	fi
	if $VERBOSE
	then
	    if $restart
	    then
		echo "Not found as expected, launching new ${IAM}"
	    else
		echo "Not found, launching new ${IAM}"
	    fi
	fi
	if [ ! -f "$control" ]
	then
	    _warning "control file $control for host $args_host ${IAM} has vanished"
	    sts=1
	    continue
	fi
	dir=`echo "$args_dir" | _unexpand_control`
	alt_dir="`echo "$args_dir" | _unexpand_pcp_control`"
	host=`echo "$args_host " | _unexpand_control | sed -e 's/ $//'`
	$PCP_AWK_PROG <"$control" >$tmp/control '
$1 == "'"#!#$host"'" && ($4 == "'"$dir"'" || $4 == "'"$alt_dir"'")	{ sub(/^#!#/,"",$1) }
									{ print }'
	if cmp -s "$control" $tmp/control
	then
	    if $restart
	    then
		:
	    else
		$VERBOSE && echo "${IAM} for host $host and directory $dir already enabled in control file $control"
	    fi
	else
	    if $VERY_VERBOSE
	    then
		echo "Diffs for control file $control after enabling host $host and directory $dir ..."
		diff "$control" $tmp/control
	    elif $VERBOSE
	    then
		echo "Enable ${IAM} for host $host and directory $dir in control file $control"
	    fi
	    $CP $tmp/control "$control"
	fi
	$CHECK $CHECKARGS -c "$control"

_check_started "$args_dir" || sts=1
    done

return $sts
}

# check command - start dead hosts, if any
#
_do_check()
{
    _do_start $*
}

# stop command
#
_do_stop()
{
    skip_control_update=false
    [ "$1" = '-q' ] && skip_control_update=true
    sts=0
    rm -f $tmp/sts
    cat $tmp/args \
    | while read control class args_host primary socks args_dir args
    do
	host=`echo "$args_host " | _unexpand_control | sed -e 's/ $//'`
	if grep "^#!#$host[ 	]" $control >/dev/null
	then
	    _warning "${IAM} for host $host already stopped, nothing to do"
	    continue
	fi
	$VERBOSE && echo "Looking for ${IAM} using directory $args_dir ..."
	pid=`_get_pid "$args_dir"`
	if [ -z "$pid" ]
	then
	    _warning "cannot find PID for host $args_host ${IAM}, already exited?"
	else
	    # $PCPQA_KILL_SIGNAL is only intended for QA tests
	    #
	    $VERBOSE && echo "Found PID $pid to stop using signal ${PCPQA_KILL_SIGNAL-TERM}"
	    $KILL ${PCPQA_KILL_SIGNAL-TERM} $pid
	    if _check_stopped "$args_dir"
	    then
		:
	    else
		echo 1 >$tmp/sts
		continue
	    fi
	fi
	$skip_control_update && continue
	if [ ! -f "$control" ]
	then
	    _warning "control file $control for host $args_host ${IAM} has vanished"
	    echo 1 >$tmp/sts
	    continue
	fi
	dir=`echo "$args_dir" | _unexpand_control`
	alt_dir="`echo "$args_dir" | _unexpand_pcp_control`"
	$PCP_AWK_PROG <"$control" >$tmp/control '
$1 == "'"$host"'" && ($4 == "'"$dir"'" || $4 == "'"$alt_dir"'")	{ $1 = "#!#" $1 }
								{ print }'
	if cmp -s "$control" $tmp/control
	then
	    $VERBOSE && echo "${IAM} for host $host and directory $dir already disabled in control file $control"
	else
	    if $VERY_VERBOSE
	    then
		echo "Diffs for control file $control after disabling host $host and directory $dir ..."
		diff "$control" $tmp/control
	    elif $VERBOSE
	    then
		echo "Disable ${IAM} for host $host and directory $dir in control file $control"
	    fi
	    $CP $tmp/control "$control"
	fi
    done

[ -f $tmp/sts ] && sts="`cat $tmp/sts`"

return $sts
}

# restart command
#
_do_restart()
{
    sts=0
    mv $tmp/args $tmp/restart
    cat $tmp/restart \
    | while read control class host primary socks dir args
    do
	echo "$control" "$class" "$host" "$primary" "$socks" "$dir" "$args" >$tmp/args
	if _do_stop -q
	then
	    if _do_start -r
	    then
		:
	    else
		_error "restart failed to start host $host in class $class"
		sts=1
	    fi
	else
	    _error "restart failed to stop host $host in class $class"
	    sts=1
	fi
    done

return $sts
}

ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
[ $? != 0 ] && exit 1

eval set -- "$ARGS"

DOALL=false
FORCE=false
IDENT=''
SHOWME=false
CP=cp
RM=rm
CHECK="sudo -u $PCP_USER -g $PCP_GROUP $PCP_BINADM_DIR/${IAM}_check"
CHECKARGS=''
KILL="$PCP_BINADM_DIR/pmsignal -s"
MIGRATE=false
VERBOSE=false
VERY_VERBOSE=false
VERY_VERY_VERBOSE=false
CLASS=default
POLICY=''
EXPLICIT_CLASS=false
ARGS=''
while [ $# -gt 0 ]
do
    case "$1"
    in
	-a)	DOALL=true
		;;
	-c)	CLASS="$2"
		EXPLICIT_CLASS=true
		shift
		;;
	-C)	CHECKARGS="$CHECKARGS $2"
		shift
		;;
	-f)	FORCE=true
		;;
	-i)	IDENT="$2"
		shift
		;;
	-m)	MIGRATE=true
		;;
	-N)	SHOWME=true
		CP="echo + $CP"
		RM="echo + $RM"
		CHECK="echo + $CHECK"
		KILL="echo + $KILL"
		;;
	-p)	POLICY="$2"
		shift
		;;
	-V)	if $VERY_VERBOSE
		then
		    VERY_VERY_VERBOSE=true
		elif $VERBOSE
		then
		    VERY_VERBOSE=true
		else
		    VERBOSE=true
		fi
		;;
	--)	# we're not being POSIX conformant, want to allow -x options after command
		# so skip this one
		;;
	-*)	_usage
		# NOTREACHED
		;;
	*)	# this is a non-option arg, gather them up for later
		if [ -z "$ARGS" ]
		then
		    ARGS="\"$1\""
		else
		    ARGS="$ARGS \"$1\""
		fi
		;;
    esac
    shift
done

eval set -- $ARGS
if [ $# -lt 1 ]
then
    _usage
    # NOTREACHED
fi

LOCALHOST=`hostname`

ACTION="$1"
shift

if [ -n "$IDENT" ]
then
    if [ "$ACTION" != create -a "$ACTION" != cond-create ]
    then
	_error "-i option may only be used with create or cond-create commands"
    fi
fi

if $VERY_VERBOSE
then
    if $EXPLICIT_CLASS
    then
	echo "Using class: $CLASS"
    else
	echo "Using default class"
    fi
fi
[ -z "$POLICY" ] && POLICY="$PCP_ETC_DIR/pcp/${IAM}/class.d/$CLASS"
if [ "$CLASS" = default ]
then
    if [ ! -f "$POLICY" ]
    then
	# This is the _real_ default policy, when there is no
	# $PCP_ETC_DIR/pcp/${IAM}/class.d/default
	#
	cat <<'End-of-File' >$tmp/policy
[class]
default

[ident]
%h

[destroy]
condition(1)

[create]
hostname(.*)

[control]
#DO NOT REMOVE OR EDIT THE FOLLOWING LINE
$version=1.1
End-of-File
	if [ ${IAM} = pmlogger ]
	then
	    echo '%h n n PCP_ARCHIVE_DIR/%i -c ./%i.config' >>$tmp/policy
	else
	    echo '%h n n PCP_LOG_DIR/pmie/%i/pmie.log -c ./%i.config' >>$tmp/policy
	fi
	POLICY=$tmp/policy
	$VERY_VERBOSE && echo "Using default policy"
    fi
else
    if [ ! -f "$POLICY" ]
    then
	if [ "$ACTION" = create ]
	then

_error "policy file $POLICY not found, class $CLASS is not defined so cannot create"
	elif [ "$ACTION" = destroy ] && ! $FORCE
	then
	    _error "policy file $POLICY not found, class $CLASS is not defined so cannot destroy"
	fi
    fi
    $VERY_VERBOSE && echo "Using policy: $POLICY"
fi

FIND_ALL_HOSTS=false
FROM_COND_CREATE=false

# don't get confused by processes that exited, but did not cleanup ...
# build a list of runing ${IAM} processes
#
_get_pids_by_name ${IAM} | sed -e 's/.*/^&$/' >$tmp/pids

case "$ACTION"
in
    check|create|cond-create|start|stop|restart|destroy)
	    if [ `id -u` != 0 -a "$SHOWME" = false ]
	    then
		_error "you must be root (uid 0) to change the Performance Co-Pilot logger setup"
	    fi
	    # need --class and/or hostname
	    #
	    if [ "$ACTION" = "check" ]
	    then
		FIND_ALL_HOSTS=true
	    elif [ $# -eq 0 ]
	    then
		$EXPLICIT_CLASS || _error "\"$ACTION\" command requres hostname(s) and/or a --class"
		FIND_ALL_HOSTS=true
	    fi

_lock
	    if [ "$ACTION" != create -a "$ACTION" != cond-create ]
	    then
		_get_matching_hosts "$@"
		if [ ! -f $tmp/args ]
		then
		    if [ "$ACTION" = check ]
		    then
			# special case: successfully check nothing
			status=0
			exit
		    else
			_error "no matching host(s) to $ACTION"
			exit
		    fi
		fi
	    fi
	    # small wrinkle: map - to _ in action, e.g.
	    # cond-create -> cond_create, so it is a valid shell
	    # function name
	    #
	    eval "_do_`echo "$ACTION" | sed -e 's/-/_/g'`" $*
	    cmd_sts=$?
	    if [ $cmd_sts -ne 0 ]
	    then
		_error "could not complete $ACTION operation"
	    fi
	    ;;

status)
	    [ $# -eq 0 ] && FIND_ALL_HOSTS=true
	    _get_matching_hosts "$@"
	    _do_status
	    ;;

*)	    _error "command \"$ACTION\" not known"
	    exit
	    ;;
esac

exit

${this.title}

Code Editor : pmiectl